Top 9 SNIPER FUEL INJECTION System Kit – Automotive Replacement Fuel Injector Kits

As an Amazon Associate I earn from qualifying purchases.

1. Swpeet

#ad

Swpeet 120Pcs 10 Sizes Zinc Plated Mini Fuel Injection Line Style Hose Clamp Assortment Kit Perfect for Automotive, Plant & Construction, Agriculture

#adSwpeet #ad - Environmental friendly -- it can be reused and recycle if you do not want them to stay on the original place due to the high quality material which makes them worked last for long. These hose clamps did get the job done well, no leaking at all.

So many sizes are enough for daily needs. High quality -- high quality zinc plated steel hose clamp, plating zinc, Can resist the corrosion and rust in marine environments. Working great -- these hose clamps are just what you need when you have to make repairs to your home or automobile. Easy to use -- just need use a screwdriver to loosen the screw of hose clamp, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw. It comes with a wide variety of clamp sizes so you don't have to concerned about which size you need, you can just try it until it fits.

The hole technology makes its screw tightly bite the steel band. Fit hose diameter: 7-9mm: 15pcs; 8-10mm:15pcs; 9-11mm: 15pcs; 10-12mm: 15pcs; 11-13mm: 10pcs; 12-14mm: 10pcs; 13-15mm: 10Pcs; 14-16mm: 10Pcs; 15-17mm: 10Pcs; 16-18mm: 10Pcs. Wide adjustable size range --clamp kit are flexible and ductile with wide adjustable size range from 7 to 18mm.

Brand	Swpeet #ad
Manufacturer	Swpeet #ad
Part Number	S-mini

2. Holley

#ad

Holley 550510 Electronic Fuel Injection

#adHolley #ad - A flame arrestor is required for marine installations, Battery -, such as part number, 720-1 or 720-13. Supports up to 650hp with four 100 lb/Hr Injectors! Only 4 wiring connections required! battery +, switched ignition & rpm.

Dual pattern bolt on carburetor replacement, designed to fit 4150 Flange & Spread Bore manifolds - Spread Bore Sealing Plate Part #9006 is recommended. Self-tuning ecu means you don't have to be a computer/tuning wiz to have efi! simple Calibration Wizard Answer a few questions about your engine and it creates the base map, then starts tuning on its own! - NO laptop required! Note : Refer to the PDF attached below in Technical Specification for User Manual. Throttle body mounted ecu – no extra boxes to mount.

Brand	Holley #ad
Manufacturer	Holley #ad
Height	8 Inches
Length	12.25 Inches
Weight	9.02 Pounds
Width	11 Inches
Part Number	550510
Model	550510

3. FAST

#ad

FAST Fuel Injection 30227-KIT EZ-EFI Self-Tuning Fuel Injection System

#adFAST #ad - Special shipping information: This item cannot be returned and has additional shipping restrictions. Easy-to-use setup wizard provides comprehensive walk-through and system tunes itself. Bolts on to any naturally aspirated, gasoline engine up to 600 hp. Protected by a limited lifetime warranty so you can purchase with peace of mind; Ideal for street rods and muscle cars. System includes ecu, fuel injectors, wide-band oxygen sensor, wiring harness, fuel pump kit and throttle body for an easy installation.

Brand	FAST #ad
Manufacturer	FAST #ad
Height	9.5 Inches
Length	27.5 Inches
Weight	21.5 Pounds
Width	16.25 Inches
Part Number	30227KIT
Model	30227-KIT
Warranty	Limited 1 Year

4. FI-TECH

#ad

FiTech Easy Street EFI System Up to 600HP

#adFI-TECH #ad - Fuel injection - go efi 4 - throttle body - square bore - 70 lb/hr Injectors - Aluminum - Black Anodize - Universal - Kit.

Brand	FI-TECH #ad
Manufacturer	Fitech EFI #ad
Height	7.5 Inches
Length	11.5 Inches
Weight	11.9 Pounds
Width	14 Inches
Part Number	30005
Model	FIT-30005

5. Holley

#ad

Holley 550-511K Sniper EFI Self-Tuning Master Kit

#adHolley #ad - The sniper efi master kit contains the most complete EFI fuel system on the market. Put an end to cold start issues, return bulkhead, in-line fuel pump, vapor lock, hesitations, post and pre fuel filters, and flooding. Holley just brought efi within range, introducing sniper efi master kits! it's economically priced so you can have all the benefits of EFI and still have money to finish or upgrade the rest of your ride! Perfect for street rods, muscle cars, off road trucks or nearly any carbureted vehicle.

Brand new holley sniper efi self-tuning master kit, black ceramic finish Holley Sniper 4 Barrel Fuel Injection Conversion - Self-Tuning Master Kit plus Handheld EFI Monitor Part #550-511K. Everything is included to completely plumb your fuel system including; 20 feet of 3/8" efi Hose, and all of the necessary fittings and hardware.

Upgrade to sniper efI and get the tactical accuracy of EFI today! Specs: cfm: 800 | emission code: 3 | finish: black | flange style: dual bolt pattern | fuel Pressure: 58. 5 psi | height: 3. 28" injector Size: 100 lb. Hr @58. 5 psi. Inlet/outlet size: 9/16-18 female o-ring an 6 | map sensor: 2bar | max horsepower rating: 650 naturally Aspirated | Product Type: Sniper 4BBL TBI Kits | Transmission: 700R4/200R4-TH350

Brand	Holley #ad
Manufacturer	Holley #ad
Height	0 Inches
Length	0 Inches
Weight	20.04 Pounds
Width	0 Inches
Part Number	550-511K
Model	550-511K

6. FAST

#ad

FAST 30227-06KIT EZ Fuel Self-Tuning Throttle Body Injection Kit w/Inline Fuel Pump

#adFAST #ad - Fit type: Universal Fit. Includes in-line fuel pump. No software necessary; intuitive self-learning system will work with only a few simple questions answered in the handheld's Setup Wizard And one throttle screw adjustment. Can control electric fuel pump, electric cooling fan And A/C line to raise idle RPM when A/C is turned on. Direct bolt-on carburetor replacement with throttle body dimensions similar to Holley And other popular carburettors, including a Holley-style throttle linkage And 4150 square flange intake bolt pattern. Includes injectors And fuel rails supporting up to 650 HP.

Brand	FAST #ad
Manufacturer	COMP Cams #ad
Height	14 Inches
Length	22 Inches
Weight	0.01 Pounds
Width	11.9 Inches
Part Number	30227-06KIT
Model	30227-06KIT
Warranty	Limited Lifetime

7. Southwest Speed

#ad

NEW HOLLEY SNIPER EFI SELF-TUNING KIT,800 CFM,BLACK,4BBL,FUEL INJECTION CONVERSION

#adSouthwest Speed #ad - Upgrade to sniper efI and get the tactical accuracy of EFI today! Holley just brought efi within range! introducing sniper efi! it's economically priced so you can have all the benefits of EFI and still have money to finish or upgrade the rest of your ride! Perfect for street rods, vapor lock, muscle cars, hesitations, off road trucks or nearly any carbureted vehicle.

Specs: cfm: 800 | coast guard approved: yes | emission code: 3 | finish: black | flange style: dual bolt Pattern | Fuel Pressure: 58. 5 psi | height: 3. 28" | injector Size: 100 lb. Hr @58. 5 psi. Brand new holley sniper efi self-tuning kit - black ceramic finish, 4 Barrel Fuel Injection Conversion - Self Tuning Kit plus Handheld EFI Monitor.

Inlet/outlet size: 9/16-18 female o-ring an 6 | map sensor: 2bar | max horsepower rating: 650 naturally Aspirated | Model: 4150 EFI Conversion Throttle Body | Product Type: EFI | Transmission: 700R4/200R4. Part #550-511. Put an end to cold start issues, and flooding.

Brand	Southwest Speed #ad
Manufacturer	HOLLEY PERFORMANCE PRODUCTS #ad
Height	0 Inches
Length	0 Inches
Weight	0 Pounds
Width	0 Inches
Part Number	HOL-550-511

8. Southwest Speed

#ad

NEW HOLLEY SNIPER EFI 2300 SELF-TUNING MASTER KIT,2 BBL FUEL INJECTION CONVERSION,POLISHED,580 CFM,350 HP,COMPATIBLE WITH 2300 FLANGE STYLE MANIFOLDS

#adSouthwest Speed #ad - C4/c6, th350 . Injector size: 100 lb/hr @ 58. 5 psi | inlet/outlet size: 9/16-18 female o-ring an 6 | map sensor: 2 bar | max horsepower rating: 350 naturally Aspirated | Product Type: Sniper 2 BBL EFI Kits | Transmission: 700R4/200R4, F. Transmissions may require Part Number 20-60 F. Note: united states coast guard approved certified to iso 8846, sae j1171 requirements | f. Transmission kickdown spring & bracket kit | a flame Arrestor is REQUIRED for marine installations, such as part number, 720-1 or 720-13.

Brand	Southwest Speed #ad
Height	0 Inches
Length	0 Inches
Weight	0 Pounds
Width	0 Inches
Part Number	HOL-550-849K

9. Southwest Speed

#ad

NEW HOLLEY SNIPER EFI SELF-TUNING MASTER KIT,800 CFM,GOLD,4BBL,FUEL INJECTION CONVERSION

#adSouthwest Speed #ad - Inlet/outlet size: 9/16-18 female o-ring an 6 | map sensor: 2bar | max horsepower rating: 650 naturally Aspirated | Product Type: Sniper 4BBL TBI Kits | Transmission: 700R4/200R4-TH350 Specs: cfm: 800 | emission code: 3 | finish: gold | flange style: dual bolt pattern | fuel Pressure: 58.

5 psi | height: 3. 28" injector Size: 100 lb. Hr @58. 5 psi. Put an end to cold start issues, post and pre fuel filters, hesitations, return bulkhead, in-line fuel pump, and flooding. The sniper efi master kit contains the most complete EFI fuel system on the market. Holley just brought efi within range, muscle cars, introducing sniper efi master kits! it's economically priced so you can have all the benefits of EFI and still have money to finish or upgrade the rest of your ride! Perfect for street rods, off road trucks or nearly any carbureted vehicle.

Everything is included to completely plumb your fuel system including; 20 feet of 3/8" efi Hose, vapor lock, and all of the necessary fittings and hardware. Brand new holley sniper efi self-tuning master kit, gold ceramic finish Holley Sniper 4 Barrel Fuel Injection Conversion - Self-Tuning Master Kit plus Handheld EFI Monitor Part #550-516K. Upgrade to sniper efI and get the tactical accuracy of EFI today! .

Brand	Southwest Speed #ad
Manufacturer	HOLLEY PERFORMANCE PRODUCTS #ad
Height	0 Inches
Length	0 Inches
Weight	0 Pounds
Width	0 Inches
Part Number	HOL-550-516K