As an Amazon Associate I earn from qualifying purchases.
1. Forfuture-go #ad
10FT 6AN Braided Fuel Line Hose -6AN Nylon Braided for 3/8" Tube Size #adForfuture-go #ad
- Application for: racing fuel, pump gas, diesel, fuels with ethanol, alcohol based fuels, motor oil & coolant etc. The fitting adapter for PTFE hose is NOT FIT. Working temperature: -40°F to +300°F.
Working pressure: 500 psi. Burst pressure: 2000 PSI. Inner diameter: 8. 73 mm 034 inch, outer Diameter: 14. 22 mm 056 inch. Our rubber hose should compatible with rubber fitting adapter. Note: double check the hose size before bidding.
2. muge racing #ad
MUGE RACING 12FT 3/8in Nylon Braided Fuel Line Kit 6AN Fuel Line Hose with Hose Ends and Hose Separator Clamp,12FT/3.6M #admuge racing #ad
- Maximum working pressure psi: 500 psi. Work condition - maximized resistance to heat, with long-lasting lifespan, corrosion and abrasion. The operating temperature range of cpe hose is -40°F to 257°F -40°C to 125°C. Burst pressure psi: 2000psi. The cpe fuel line hose can stand high-temper, and pressure, Please check the working pressure and temperature of your system before purchase.
Wide application - noly ont fit e85!the muge racing nylon braided fuel line hose can be used as transmission oil cooler line, pump gas, vacuum line, hydraulic fluid, coolant, fuel supply line, fuel gauges line, oil, race gas, coolant fluid hose, vacuum, turbo cooler line, oil feed line and can be used with transmission fluid, fuel return line, diesel and fuel.
Tips - professional installation is highly recommended. Please do not install it in a corrosive environment, which will affect the service life of braided fuel Line Hose. The construction enhances flexibility and give a cool racing appearance, The fittings and hose separator for the fuel line is made of T6061 Aluminum, anodized finish for high strength and good durability.
Flexible & durable - the black braided nylon fuel line is braided with outer nylon braided, center stainless steel, Inner synthetic rubber. A gift for cut hose -there is a free duct tape for you, make you easily cut hose without destroying the steel braided, Before you cut the hose, you just need to wrap duct tape tightly at the cut off area and cut through the center of the wrapped up tape rotating the hose during the cut!.
3. EVIL ENERGY #ad
EVIL ENERGY 6AN Fuel line Hose Braided Nylon Stainless Steel Oil Gas CPE 20FT Black #adEVIL ENERGY #ad
- Nylon and stainless steel braided fuel line can be compatible with transmission fluid, vacuum, oil, race gas, pump gas, hydraulic fluid, coolant, diesel and fuel.
Outside diameter: 054inch. Any problem you might have, please feel free to contact us via Amazon message. Maximum working pressure: 500psi. Application: an6 braided fuel line widely used as transmission cooler line, coolant fluid hose, fuel supply line, fuel return line, engine cooler line.
Temperature range: -40℉ to 257℉. Please measure before purchase! Evil energy provide this product 3-month warranty. Inside diameter: 11/32". Length: 20 Feet. Bursting Pressure: 2000psi.
4. theBlueStone #ad
TheBlueStone -4AN -6AN -8AN -10AN Braided Fuel Line Hose 10FT -6AN Nylon Braided for 3/8" Tube Size #adtheBlueStone #ad
- Our rubber hose should compatible with rubber fitting adapter. Note: double check the hose size before bidding. The fitting adapter for PTFE hose is NOT FIT. Working temperature: -40°F to +300°F.
Inner diameter: 8. 73 mm 034 inch, outer Diameter: 14. 22 mm 056 inch. Working pressure: 500 psi. Application for: racing fuel, pump gas, alcohol based fuels, fuels with ethanol, diesel, motor oil & coolant etc. Burst pressure: 2000 PSI.
5. maXpeedingrods #ad
MaXpeedingrods New 20Feet AN6 Stainless Steel Braided CPE Fuel Line Hose 20Ft + -6AN Push Lock Fitting Hose End 10Pcs #admaXpeedingrods #ad
- Working pressure: 500 psi / burst pressure: 2000 psi & Working Temperature: -40 ℉ to +350℉. Package includes: 1 x 20 feet an 6 nylon- stainless steel braided fuel hose; 4 x an6 straight push lock hose end; 2 x 45° AN6 Push Lock Hose End; 2 x 90° AN6 Push Lock Hose End; 2 x 180° AN6 Push Lock Hose End You will get exactly the same as picture shows.
Material: made of durable cpe synthetic rubber tube bonded and secured by Nylon and 308 Stainless Steel outer braid.
Hose end push lock fittting: removable head for push-on-lock, it will acheive quick assembly, no specialised tools to secure the fitting into the hose, save yoiur time. Fuel line inner diameter: 034" / 8. 64mm; outside diameter: 055" /13. 97 mm.
6. YIUIY #ad
Vacuum, YIUIY 6AN 3/8" 20FT Fuel Line Hose Braided Nylon Stainless Steel Oil Gas Transmission Oil Cooler Line Coolant Hose Fuel Line Pump Gas, Race Gas, Diesel Hose Line Tube Black, Hydraulic Fluid #adYIUIY #ad
- The fitting adapter for PTFE hose is NOT FIT. Not fit for e85. Bursting pressure=2465psi17mpa. Our rubber hose is compatible with rubber fitting adapter. Inner diameter=034 inches 8.
6 mm. Outer diameter=055 inches 14. 00 mm. Working temperature range=-40℉ to 338℉-40℃ to 170℃. Size- length=20 feet6m. Nylon braided fuel hoses can be used as transmission oil cooler line, turbo cooler line, carburetor fuel hose, fuel return line, pump gas, fuel supply line, diesel, oil feed line, ls swap fuel line.
Material- inner layer:cpe synthetic rubber;middle layer:304 stainless steel wire mesh sleeve;outer layer:braided nylon.
Resistant to high temperature pressure abrasion and aging. Working environment-maximum working pressure=725psi5mpa. Excellent flexibility and flame retardancy. Application- for racing fuel, coolant fluid hose, motor oil & coolant etc. Note- double check the hose size before bidding.
7. iKer #ad
Fuel Line Kit 3/8" 6AN 20FT Hose Nylon Stainless Steel Braided CPE Oil Fuel Line Fittings Kit Universal #adiKer #ad
- Maximum working Pressure psi: 500 psi. Not suitable for E85. Application6an nylon braided hose kit can usually be used with coolant, turbo cooler system, air and fuel. It is compatible with nearly every substance or agent used. Recommended to use Adjustable AN Wrench.
This kind of braided 6an hose can be used for brake system, engine oil, oil cooler kit, transmission system, oil return, pump air, fuel pump, diesel, fuel filter, oil return system, hydraulic oil, etc.
We offers 3 months limited warranty & Free lifetime technical support. Bursting pressure psi: 2000psi. Package includesthe 6an fuel line hose kit includes: 4 x straight swivel hose ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends and 5/8 CPE braided fuel line Length:20ft/6M.
Features6an fuel line kit: black braided nylon fuel hose has a full black nylon fiber braided jacket and chlorinated polyethylene CPE synthetic rubber inner line. Please note that the service life may be shortened when using fuel. Safety featuresthe 6an cpe hose working temperature range: -100℉ to 500℉ -73℃ to 260℃. Warrantyprofessional installation is highly recommended.
8. Vincos #ad
25 Ft 6AN AN6 3/8" Universal Braided Stainless Steel CPE Oil Fuel Gas Line Hose #adVincos #ad
- Perfect racing fittings for fuel injection use. Good quality and durability, working temperature: -40f to 248f -40°c to + 120°C under most operating conditions; Working Pressure:1015 PSI - Burst Pressure: 6090 PSI.
Application for racing fuel, fuels with Ethanol, Pump Gas, alcohol Based Fuels, Motor Oil & Coolant etc. Length:25 ft, outside diameter: 13. 89 mm 0547", inner diameter: 8. 73 mm 0343", universal Accessory, Easy to Operate. Braided fuel hose with special hand feel.
9. Partschoice #ad
20FT 6AN 3/8" Nylon Stainless Steel Braided CPE Oil Gas Fuel Line Universal #adPartschoice #ad
- Sizeid:an6, length:6. 09m/20ft, color:black, outside diameter:055inch13. 97mm, inner Diameter: 034inch 8. 71mm. Tips:professional installation is highly recommended. Please do not install it in a corrosive environment, which will affect the service life of 6an braided fuel Line Hose.
Not legal in the state of California & New York, Not complies with C. A. R. B. Applications: racing fuel, long service life, alcohol-based fuel, ethanol fuel, wear resistance and high temperature resistance, etc.
Regulations. Performance:an6 nylon fiber and stainless steel braided surface are very wear-resistant and have good ductility. Outer nylon braid has excellent flame retardant and performs well at work. Guaranteed production process and quality inspection methods to Ensure product durability and reliability.
Material: inner hose: cpe synthetic rubber;the middle layer: 304 stainless steel wire mesh sleeve;The outer layer: High quality braided nylon, Working Temperature: -40 ℉ to +350 ℉; Working Pressure: 1000PSI; Burst Pressure: 5000 PSI. High-quality nylon fiber and stainless steel wire materials, engine oil and coolant, pump gas, perfect racing accessories for fuel injection. Please measure before purchase.