As an Amazon Associate I earn from qualifying purchases.
1. ABN #ad
ABN 1/2 Inch Drive SAE Inner Tie Rod Removal Tool Kit – Inner Tie Rod Tool Set with Tie Rod Puller Tool and 3 Adapters #adABN #ad
- Fits your vehicle: fits rounded tie rods for rack and pinion steering on most chrysler, ford, and gm vehicles; 1-3/16-inch adapter compatible with Ford front-wheel drive FWD vehicles with new style tie rods; 1-5/16-inch adapter compatible with Ford rear-wheel drive RWD and most Chrysler vehicles with racks and pinion power steering with new style tie rods; 1-7/16-inch adapter compatible with GM and Chrysler cars with saginaw in steering gear.
Make tie rod adjustments: the abn | master inner tie rod tool removal 4-piece kit is an inner tie rod remover set that allows you to save time by making adjustments without removing the rack and pinion to access hard-to-reach tie rods; For the most operational stability and security, dismantle and replace your tie rods with this tie rod end removal tool kit; For steering repairs and front-end work where access is limited.
Built to last: tie rod remover tool has a 1/2-inch square drive to work with your existing 1/2-inch drive wrench not for power tools; Constructed from black coated steel for maximum strength and longevity. Easy storage: heavy-duty 16. 75” x 2. 25” x 7. 5” inch 42. 5cm x 5. 7cm x 19. 1cm plastic blow-molded carrying case with 2 latches and built-in handle for easy transportation, safe storage, and quick organization.
2. ABN #ad
ABN Inner Tie Rod Tool – 3/8in Low Profile Tool for Inner Tie Rod Removal/Installation #adABN #ad
- Easy to use: slide tool over end and tighten collar to allow access with a 3/8” drive extension; adapters can be used for larger breaker bars/extensions.
Practical: use the abn inner tie rod tool 3/8” Inch to remove inner tie rods without having to extract outer tie rods. Convenient: compact/low profile design means no bulky tool to store; Inexpensive and effective way to turn smooth tie rod ends.
Strong grip: tool teeth grip the tie rod securely as you plug in a socket wrench or breaker bar and turn as necessary. Compatible: for all standard tie rods with smooth cylinder ends; Will work on any rod that fits between the 3” top and bottom components with both 9/16” nuts screwed on and tightened.
3. Cal-Van Tools #ad
Cal-Van Tools 946 Low Profile Inner Tie Rod Tool #adCal-Van Tools #ad
- Inexpensive and effective way to turn these smooth tie rod ends. No more bulky tool to store. Turns smooth tie rods easily. Simply slide tool over the end and tighten collar to allow access with an extension. Can remove inner tie rod without removing the outer tie rod.
|Brand||Cal-Van Tools #ad|
|Manufacturer||Cal-Van Tools #ad|
4. OEM TOOLS #ad
And SUVs | Includes 12 Crowfoot Adapters & 1/2 Inch Drive Tube | Get Proper Torque | Green, Pickups, OEMTOOLS 27178 Master Inner Tool Set | Remove & Reinstall Tie Rods in Cars #adOEM TOOLS #ad
- Comes in a Blow Mold Case. 5 mm, 1-1/2" and 29 mm, 1-3/8", 1-7/16", 33. Includes 12 sizes of crowfoot style adapters: 1-3/16", 32. 4 mm, 1-5/16", 40 mm, 42 mm. 1/2 inch drive tube handle makes it Easy to Remove and Re-install to Proper Torque.
125 in. 6 mm, 1-1/4", 38. Tube handle inner diameter is 2. To service small cars, Pick-ups and Large SUVs. Crowfoot adapters are Nickel Plated for Durability.
|Brand||OEM TOOLS #ad|
|Warranty||OEMTOOLS Limited One Year|
5. Mayhew Tools #ad
Mayhew Pro 29910 Speedy Universal Inner Tie Rod Tool #adMayhew Tools #ad
- Used to remove and mount inner tie rods on vehicles. Extended shaft and narrow profile allows for use in hard-to-reach and confined spaces. For use on round, hexagonal, and octagonal tie rods. Made in France. Fits 35-45mm tie rods with no additional Interchangeable adapters.
|Brand||Mayhew Tools #ad|
|Warranty||Unlimited Lifetime Warranty|
6. Lisle #ad
Lisle 46800 Master Inner Tie Rod Tool Set #adLisle #ad
- Case is designed to hold up to 4 additional crow's feet as new applications are discovered. Fits many applications on cars and light trucks. Works on inner tie rods with inaccessible wrench flats.
7. EXCELFU #ad
EXCELFU 3/8 Inch Low Profile Tool for Inner Tie Rod Removal and Installation, Inner Tie Rod Tool #adEXCELFU #ad
- Easy to use: simply slide tool over the end and tighten collar to allow access with a 3/8" drive extension; adapters can be used for larger breaker bars/extensions.
Practical: the 3/8" inner tie rod Tool turns smooth tie rods easily and remove inner tie rods without removing the outer tie rod. Compatibility: fit for all standard tie rods with smooth cylinder ends; Work on any rod that fits between the 3" top and bottom components with both 9/16" nuts screwed on and tightened.
Strong grip: tool teeth grip the tie rod securely as you plug in a socket wrench or breaker bar and turn these smooth tie rod ends. Convenient: design with compact/low profile means no bulky tool to store; Best tool for servicing inner tie rods to easily remove, repair and installation.
8. ABN #ad
ABN Tie Rod and Pitman Arm Adjusting Tool Set – 5 Pc Tie Rod Adjusting Tool Kit and Heavy Duty Pitman Arm Puller Set #adABN #ad
- Perfect size for your needs: full pitman arm and front end rebuild kit includes sae 3/4", 1-1/8”, and 1-13/16” tie rod adjusting wrench along with one 1-7/16” pitman arm puller heavy duty adjusting tool; Each inner tie rod tool permits a 360-degree rotation of the adjusting sleeve even in tight quarters, 7/8”, allowing you to more easily fine tune the alignment with this front end kit.
Improve your vehicle handling: use the abn tie rod tool to quickly remove and adjust your steering components when you are noticing excessive shaking in your steering wheel or when you notice one tire is wearing faster than the others; By simply adjusting these components with this tie rod end removal tool, you can prolong the life of your tires and improve vehicle handling and steering.
Fits your vehicle: the control arm kit is designed to adjust to varying sizes of split tie rod sleeves on most compact to full-size cars and lightweight trucks to 1-ton trucks; Use the front suspension pitman arm puller for trucks. Convenient storage: 13 by 8. 8 by 2 inch 33 x 22.
4 x 5. 1 cm heavy-duty plastic blow-molded case of this inner tie rod tool kit provides easy transportation, safe storage, and quick organization; Take your ABN rack end removal tool and pitman arm removal tool set anywhere for all your tie rod removal needs. Durable tie rod and pitman arm tools: constructed of heavy-duty steel and powder-coated finish, this tie rod adjusting tool kit is built for strength and longevity with a resistance to rust and corrosion; Use this tie rod sleeve tool and pitman arm puller kit with your existing 1/2-inch square drive ratchet, hand wrench, or breaker bar not included; Tie rod removal kit not designed for use with power or air tools.
9. mainpoint #ad
Mainpoint Universal Inner Tie Rod Hex Wrench Removal Tools 27-42mm #admainpoint #ad
- Suitable for tie rods between 27mm and 42mm in diameter. Universal fits for all vehicles including Mercedes, Benz, Nissan, BMW, Honda, Ford, Toyota, etc.
Designed for the removal of the direction of the steering rod. Specially designed to be used with 1/2" square drive tools. Easily removes inner tie rod ends without disassembling rack and pinion.
|Manufacturer||Mainpoint Tools #ad|
10. ABN #ad
And Pitman Arm 5-Piece Tool Kit – Separator for Cars and Light Trucks, ABN Ball Joint, Tie Rod #adABN #ad
- Practical: use the abn ball joint, tie Rod, tie rods, and pitman arm 5-Piece Tool Kit to separate pitman arms, and ball joints on your vehicle. Contents: package includes 1 tie rod spreader with 11/16” 17.
5mm wedge opening, 1 ball joint separator with 15/16” 23. 8mm jaw opening, 1 7-3/4" 196. 9mm kunrled striking handle for use with conventional hammers, 1 pitman arm wedge with 1-1/8” 28.
6mm opening, 1 6-3/4" 171. 5mm adapter handle for use with air hammer, and 1 10-1/2” x 7-1/2” x 2” 266. 7mm x 1905mm x 508mm carrying case. Versatile: this is a complete coverage set featuring 5 different SAE standard pieces that are universal for cars and light trucks; All forks are threaded to be interchangeable with either handle.
Durable: constructed from chrome vanadium steel for strength and longevity. Easy storage: comes in a heavy-duty blow-molded plastic carry case for portability and organization.
|Part Number||ABN 9333-FBA|