As an Amazon Associate I earn from qualifying purchases.
1. Nilight #ad
TL-01 6" Oval Red LED Tail 2PCS w/Surface Mount Grommets Plugs IP65 Waterproof Stop Brake Turn Trailer Lights for RV Truck Jeep, 2 Years Warranty, Nilight #adNilight #ad
- 75”. Fit type: Universal Fit. Just make sure the hole size before you purchase. 5” x 1. Ready for the weather: be highly silicon sealed, IP67 waterproof rating, always be ready for different kinds of weather attack. Upgraded unique design: niligh's tail light has unique “ears” on its two sides, upgrade notches on the inside of grommet, and a tighter attaching ability between 3-prong plug and it.
Shake proof, there will be no worries of loosing light or wires. 6” x2. These help the light fit perfectly and firmly on the grommet, and the 3-prong plug attaches tightly on the light.
Hole size for surface mount is: 6. Easy installation: the taillight comes with grommets for surface mount, you just need to surface mount the grommets & light setup, also added a 3-prong watertight plug with attached wire.
For installation, and then connect the 3 wires to the corresponding wires on vehicles. Universal application: work on a 12 v dc system, tail light for all kinds of trucks, trailers, travel trailer, function as turn/Brake light, horse trailer, tractors, dump Truck, semi-trailer, special vehicle, etc. Awesome brightness: each tail light has 10 pcs high-quality SMD LEDs to output super bright red light, high brightness of Turn/Brake light, low brightness for Taillight, improving visibility and ensuring you a safer night.
|Warranty||2 Years Warranty|
2. iBrightstar #ad
Brilliant Red, iBrightstar Newest 9-30V Super Bright Low Power 1157 2357 2057 7528 BAY15D LED Bulbs with Projector Replacement for Stop Tail Brake Lights #adiBrightstar #ad
- Fits: 1157 bay15d 1016 1034 1157 1157a 2057 2057a 2357 2357a 2357na 2397 3496 7528 p21/5w etc. Advantage: exclusive design, full aluminum housing with projection lens for Maximum Light output and better heat distribution, 300% brighter than original halogen bulb, built in Constant Current IC for Longer life span & Low Power Consumption.
Easy installation, plug and play. Application: brake lights, tail lights, daytime Running Lights etc.
Load resistor or flash relay might be needed to prevent the hyper flash when replacement for Turn Signal Lights. Please double check owners manual or original bulb number to confirm before placing an order. Set of 2 bulbs 54smd 3014 & 3smd 3030 high brightness chips per bulb, Working Voltage:9v-30v. Any other problem please feel free to contact us, we are always here to satisfy of you.
|Part Number||iBrightstar-1157-3014 3030-54 3R|
|Model||1157-3014 3030-54 3R|
3. Nilight #ad
Nilight TL-11 1PC Red 9 LED ID Bar Marker Tail Black Stainless Steel Bracket for Truck Trailer Boat Identification Light, 2 Years Warranty #adNilight #ad
- Universal for any 12v vehicles more than 80” wide like trucks, RV, cargo trailer, SUV Motorhome etc. Enhanced visibility and safety: for your trailer 80” or wider that requires identification light, the ID bar marker light mounted on the top or between the taillights draws extra visibility for the wide range, makes the light more eye-catching to warn the upcoming car.
Enhance your on-road safety. Top led quality: 9 upgraded piranha led, higher intensity light, which feature wider lighting angle, and better heat dissipation, is used on the trailer light to make it very durable and output bright light without glare.
Ready for all weather abuse: ip67 waterproof sonically welded light housing, durable ABS cover and the anti-corrosion black base bracket, make the lightly well protected to withstand all weather abuse.
Mounting bracket also features notches and carefully added glue at the back for easy wire routing and perfect surface mounting. Considerate design for you: comes with 2 wire leads for straight forward electrical connection, red wire to positive, black wire for negative. Package include: 1x trailer light bar, horse trailer, boat trailer, camper trailer, travel trailer, pickups, 1x hardware pack.
|Warranty||2 Years Warranty|
4. Nilight #ad
2 Years Warranty, Nilight, TL-09 6 Inch Oval White LED Trailer Tail Lights 2PCS 10 LED w/Flush Mount Grommets Plugs IP67 Waterproof Reverse/Back Up Trailer Lights for RV Truck Jeep #adNilight #ad
- These help the light fit perfectly and firmly on the grommet, there will be no worries of loosing light or wires. For installation, and then connect the 3 wires to the corresponding wires on vehicles. Hole size for surface mount is: 6. Awesome brightness: each light has 10 pcs high-quality smd LEDs to output super bright white light, high brightness for Reverse/Back Up light, low brightness for Taillight, improving visibility and ensuring you a safer night.
Shakeproof, and a tighter attaching ability between the 3-prong plug and it.
Just make sure the hole size before you purchase. Universal application: work on a 12 v dc system, travel trailer, semi-trailer, trailers, tail light for all kinds of trucks, dump Truck, horse trailer, tractors, function as the reverse /back up, special vehicle, etc.
Easy installation: comes with grommets for surface mount, you just need to surface mount the grommets & light setup, also added a 3-prong watertight plug with attached wire. Upgraded unique design: light has unique “ears” on its two sides, upgrade notches on the inside of the grommet, and the 3-prong plug attaches tightly to the light. Ready for the weather: be highly silicon sealed, IP67 waterproof rating, always be ready for different kinds of weather attack. 5” x 1. 6” x2.
|Warranty||2 Years Warranty|
5. Nilight #ad
Nilight 60" Truck Tailgate Light Bar 108 LED Single Row Tailgate Light Strip with Red Running Brake Lights Turn Signal White Reverse Light, 2 Years Warranty #adNilight #ad
- Incredible brightness - the redline led tailgate bar has 108 LEDs that shine 35% brighter than normal chips and ensure your car can be seen even in thickest traffic, day or night. Flexible & durable led lights - ip67 sealed housing, super durable and flexible with up to 30, well protects LED strips against rain drops, snow, dirt and sand, 000 hrs.
Mounted anywhere with 12v power source - 60" LED strips, rated 12V, ultra long for cargo/pickup/camper/garage/RV Awning lighting or household party decoration.
Multiple use - widely used in truck bed light, rv awning light, side door led lamp, Step Bar LED Lighting, Pickup Bed Light Kit, etc.
Ideal for DIY. No-drilling required - it comes with a tough-as-nails adhesive enhancer that increases hold strength over 5X. And wide use for Jeep Pickup Truck RV SUV. Lifespan. No need to drill, it will not fall off, included mounting hardware for more secure installation.
|Warranty||2 years warranty|
6. Nilight #ad
2 Years Warranty, Nilight 2PCS 16Inch 11 LED Red Trailer Light Bar for Park Stop Turn signals Tail Brake Light DOT Compliant IP65 Waterproof Truck Trailer Marker ID Bar #adNilight #ad
- Light bar mounting to flush-mounting the light one option is to drill a center hole or use the existing hole to go through the back wire lead and then fix the two ends by drilling in the two screws provided The other option is to add some washer when fixing the two ends or use a bracket to mount the light to avoid drilling holes for the back wire lead.
Package include 2pcS trailer marker ID bar with 2 hardware pack. Multi-functions each light has 11 high quality LED outputs high brightness and low brightness Can functions perfectly as parking light stop light turn signal light tail light and brake light.
Wide application can be perfectly used on most 12v heavy duty trucks, semi trailers, boat trailers, travel trailers, horse trailers, cargo trailers, RV camper work vehicles, etc.
Highly sealed & durable the front polycarbonate lens is sonically welded to the housing and the back wire lead is add on glue to make sure the light is completely sealed Waterproof enough to withstand all weather abuse. Easy wire connection for wire connection white wire for ground black wire for low brightness tail light and red wire for high brightness brake light.
|Warranty||2 Years Warranty|
7. AUXLIGHT #ad
Ultra Bright 57-SMD LED Replacement for Brake/Tail Lights, AUXLIGHT 2057 1157 2357 7528 2057A 1157A 2357A LED Bulbs Brilliant Red, Turn Signal/Parking or Running Lights Pack of 2, Blinker Lights #adAUXLIGHT #ad
- Best beam pattern. Full aluminum housing with projection lens for maximum light output and better heat distribution, built in constant current IC for longer life span & low power consumption. The auxlight led bulbs was made in the highest quality and most stable design, extra longer working hours.
Best led interior bulbs on the market. The most high-tech led brake/tail light bulbs! uniform beam pattern, high power 54smd 3014 & 3smd 3030 Chipsets.
Standard 1157/2057 base, it almost the same size with halogen bulbs. Super bright led interior light, +320% bRIGHTER THAN STOCK BULB. Brightest led bulbs. Can be used for brake/tail lights, blinker lights, side marker lights, turn signal/parking or daytime running Lights, DRL etc.
There need load resistor to avoid the turn signal fast blinking/hyper flash or error code on the dashboard for some vehicle. Fit in most 1157 2057 2357 7528 1016 1034 1034a 1034ll 1034na 1035 1157a 1157all 1157ll 1157na 1157st 1178a 1196 198 2057a 2057all 2057ll 2057na 2357a 2357all 2357ll 2357na 2397 3496 7528l 94 bay15d p21/5w etc socket. One year Warranty.
|Warranty||ONE YEAR WARRANTY|
8. PHINLION #ad
Phinlion Super Bright 3014 72-SMD 1157 2057 2357 1034 7528 BAY15D Red LED Light Bulbs for Brake Tail or Turn Signal Blinker Lamp Lights #adPHINLION #ad
- Set of 2 bulbs 1000 lumens per bulb, 360 degree light output; voltage: DC 12V-24V, 72 pcs high power & high brightness 3014 SMD LED chips, Color: red. Please check the owner manual or stock bulb size before purchasing.
Load resistor might be needed to avoid signal hyper flashing or error code issue. Advantage: wide operating voltage technology and built-in constant current IC driver, 6063 aluminum for excellent heat dissipation, low temperature longer lifespan.
One year warranty. Cross reference number: 1157 bay15d 1016 1034 1154 1196 2057 2357 2397 3496 7528 7528l 94 1157a 1178a 2057a 2357a 2357na, p21/5w, 12499 etc. Application: brake/tail light, center high mount stop light, side marker light, parking light, turn signal blinker light, backup reverse light, cornering light etc.
9. Nilight #ad
Nilight 48”/49” LED Tailgate Light Strip 90 LED Red/White for Running Light Brake Light Turn Signal Lights Reverse Light，2 Years Warranty #adNilight #ad
- 5 full functions: dark red running light, bright red left & right turn signals light, bright red brake light, white reverse light. And then plug and play the standard 4 flat pin connector, connect he red reverse light wire to any 12V positive wire.
Fit type: Universal Fit. Premium quality for all seasons: being fully silicon-sealed and flexible, can withstand any bad weather and harsh environment.
Outlasts with a lifespan over 50, 000 hours. Widely applicable: widely applicable for any 12V DC, truck, towing vehicle, trailers, 48” or 49 inch wide pickups, cars etc.
Easy installation: just peel the adhesive tape and stick the strip on the at the tailgate, can also use the additional mounts and screws for extra secure. Note: test left & right turn signal lights first before you stick the strip light. Impressive brightness: light strip include 90 2835 LED chips, each LED outputs 24-26 LM 6000K super bright light for safe night.
|Warranty||2 Years Warranty|
10. Yorkim #ad
1157 Brake Light Bulb, Yorkim Super Bright 1157 LED Bulbs Red, 9-30V 1157 2057 2357 7528 BAY15D LED Bulb with Projector Replacement for Back Up Reverse Lights or Tail Lights, Red #adYorkim #ad
- Easy to install - non-polarity design, simply plug and play, built-in constant current IC driver for longer lifespan up to 50, 000 hrs. Brake light, tail light, turn signal light, etc. Ultra bright – yorkim 1157 led bulb red is powered by 54 pcs 3014 & 4 pcs 3030 chipsets to offer 400% brighter lights than halogen bulbs for your vehicle.
Fitment - 1157 bay15d 2057 2357 7528, parking lights, this 1157 led bulb red is commonly used for Backup Reverse lights, brake lights, tail lights, Daytime Running Lights or Turn Signal Lights.
Head diameter 15mm, length 39mm, voltage 12v-24v, Extremely bright output 1600LM/Bulb. Note - normally different led bulbs are required for different parts of the same car i.
E. Although 1157 led bulbs are most commonly used, they may not fit all parts of your car. Specification - **note for turn signal led bulb** 50w 6ohm load resistor asin:b07ks6kmyg is needed to prevent hyper flash or error code. Please check owner's manual to verify compatibility before purchase or send us a picture of your original bulb for our assistance on selecting the right product.