As an Amazon Associate I earn from qualifying purchases.
1. FJC #ad
FJC 2731 Syringe Oil Injector #adFJC #ad
- 6 inch extension hose. 2 ounce plastic plunge oil injector. Injector not designed to inject oil into a system under pressure. Easily injects correct amount of oil. Syringe Oil Injector.
2. Dveda #ad
Brake Fluid Removal, 7 Oz./.21 Qt./200 mL Automotive Oil Extractor for Oil Change, Dveda Manual Fluid Extractor and Filler Pump, Fluid Change #adDveda #ad
- 3. Suitable for brake fluid, etc. Perfect for a variety of fluid extracting or changing applications in car, engine oil, transmission oil, gear oil, water, motorcycles or marine.
1. This transfer liquid pump is lightweight and detachable that it is easy-to-clean. They also has 2 flexible tube for easy accessing reservoirs and includes a non-drip rubber cap. 5. If you're unsatisfied with this item for any reason, please feel free to contact us, we will reply and offer a satisfied solution in 24 hours.
4. Package including 1 x 200cc extractor, 1 X Rubber Connector, 2 X Plastic Tube. 2. An easy tool to remove and fill brake fluid, transmission oil, engine oil, gear oil, water through simple syringe-action to extract or dispense fluids in or out quickly and cleanly.
3. ABN #ad
Brake Fluid Pump – 200cc 0.21qt, ABN Oil Change Syringe Brake Fluid Extractor Pump, Automotive Oil Syringe with Hose #adABN #ad
- Easy to use: transparent oil suction gun plastic fluid syringe with flexible tube give you a clear look inside so you can gauge the progress and know when the job is done without worrying about spillage during use; This oil siphon pump is a manual pressure unit not vacuum unit; Fill the reservoir with fresh fluid and then use the pressurized manual handle to allow the fluid to go into the master cylinder reservoir and then the fluid will run from the top to the bottom of the syringe.
Remove 95+ percent fluid: 7-ounce 207ml maximum fluid capacity with dually marked graduation lines from 20cc to 200cc and 002qt to 021qt measurements and included tick marks that graduate in increments of 10cc and 001qt for easy reference; unlike painted scales, the markings on this oil suction pump extractor are embossed to prevent scales from wearing off over time.
Smoothly transfer fluid: the abn | 200cc syringe for brake fluid transfer pump is a fluid evacuator that can both remove and add fluids before bleeding, power equipment oil, fluid changes, coolant reservoirs, manual transmissions, brake master cylinders, transaxles, or repairs of power steering reservoirs, gas tanks, hydraulic final drives, and more.
Access tight spots: low profile to easily get in hard-to-reach spaces and awkward angles; tubing has 10mm outside diameter od and 8mm inside diameter ID to fit your application not recommended for standard motorcycle bleed valves; 12. 5-inch 31. 8cm flexible tube with non-drip cap; 7. 75-inch x 1.
4. Probrother #ad
Probrother Fork Oil Tool Kit Gauge Suspension Level Tuning Syringe Shock Sag Adjuster Seal #adProbrother #ad
- Stainless steel 6"/150mm ruler for setting oil height. Add or remove oils from engines, transmissions, turbos, differentials, and so on. Hoses that can be set to oil level or cut down, Stores in packaging for less mess Great addition to any tool box.
All measurements in metric and standard. 60ml/2oz syringe with adjustable tie for repeat readings.
5. Qiilu #ad
Qiilu Fork Oil Tool Gauge Suspension Level Tuning Syringe Shock Adjuster Ruler #adQiilu #ad
- Install the house with the tie adjuster to the syringe. When it sucks air your level is set. Using the ruler metric on one side inches on the other measure from the end of the soft hose to the zip tie. Get your fork oil height from your manual in mm or inches.
On the metric side of the ruler 9 equals 90mm which is the same as 9cm. You can also use the other blue line which you can cut to any length for a faster setup for one bike or measurement. Slide the zip tie up or down the line to get your measurement. With the zip tie set on the fork tube you can remove oil.
6. Ketofa #ad
Ketofa R134A A/C Dye Injector Kit 2oz AC Air Conditioning Oil Dye Filling Syringe Tool R134 R12 Injection Oil and Dye Injector #adKetofa #ad
- Adds oil by allowing vacuum to pull it in after evacuation process or use refrigerant to push it in using the recharge process. Designed for professional technicians using bulk A/C oil for injection into A/C system.
Pipe working pressure is 600PSI-3000PSI. Uv-06, 1/2" acme m x 1/2" acme F 134A,. This can also be used for injecting UV dye for leak detection. Material:sturdy Aluminum construction, Rugged all metal 2 oz canister.
7. Terisass #ad
1500cc Fluid Extractor Automotive Fluid Transfer Hand Pump Syringe Bottle Oil Change Syringe Brake Fluid Extractor Pump Dispense with Adapters Manual Tool Kit #adTerisass #ad
- Super function: use the simple syringe action of the car fluid transmission manual pump syringe bottle-gearbox, brake, differential extraction dispenser, steering system, you can quickly and cleanly pump fluid in and out extraction or distribution. Professional design: comfortable grip, large faucet-shaped pump handle, ergonomics in long-term use; pump handle extends 33 cm / 13 inches.
General purpose: it is very suitable for emptying or filling the master cylinder and other fuel tanks, coolant, change Oil, pumping out the brake fluid from the fuel tank, and adding new oil before flushing the brake fluid to the caliper for power steering, replace the throttle at the rear end of the shaft.
Excellent performance: it provides a convenient choice for disassembly and filling of brake fluid, etc.
Easy to measure scale: the capacity is 1500ml; the size is 22. 8 x 22. 8 x 3. 9 inches 58cm x 10cm x 10cm; the streamlined design allows access to narrow spaces; the scale that can measure the amount of fluid when you pull it – 500 mL, 1000 mL, 1500 mL label 100 mL increments. It is to extract or replace engine oil or lubricant in ATV, gear oil, ship, antifreeze, agricultural equipment, power steering fluid, industrial gear box Ideal for motor vehicles.
8. Robinair #ad
Robinair 18470 Syringe-Type POE Oil Injector for HV R-1234YF Systems #adRobinair #ad
- Injector features a 1/2 ounce oil capacity and smooth acting plunger for precise control. Robinair's 18470 is a poe labeled manual oil injector that enables the user to inject POE type A/C system lubricant into a vehicle's A/C system.
Equipped with a low-side r-1234yf service coupler for easy connection to low-side vehicle A/C systems. Made in the USA by Robinair. Use to inject oil before or after charging the A/C system. Fit type: Vehicle Specific.
|Warranty||Per Contract with Amazon|
9. Pilots HQ #ad
Best Gun Grease and Trigger Grease. MIL-G-21164D, Mobil 28 Grease, 10cc Syringe Specifically Sized for Gun Owners and Builders #adPilots HQ #ad
- Mobil 28 grease in a hard to find size. 10cc curved tip Syringe for the easiest application. Mil-prf-81322g, amendment 4, dod-g-24508a, natO G-395.
The trigger grease trusted by many trigger and gun manufacturers. Mil-spec gun grease in easy to use quarter ounce container for use with guns and other smaller applications.
|Brand||Pilots HQ #ad|
10. QWORK #ad
And Brake Fluid Extractor, QWORK 200ML/0.21Qt./7OZ Extraction&Fill Pumb, Syringe Style Manual Automotive Pump,Gear Oil #adQWORK #ad
- And any questions feel free to contact us, we will be here for you. Transparent body: the manual extraction type transparent bottle body with scale can check the condition of the extraction liquid at any time to better control the amount of extraction.
Specification: 200ml/021qt/7oz. It can be used to replace automotive fluids in cars, trucks, RVs, antifreeze, etc.
And can easily remove brake fluids, gear oils and other liquids. 100% satisfied service: enjoy a smooth&worry-free return service within a month. Wide application: this product has chemical resistance and oil resistance. Extended hose: it has an extended syringe hose, easy to draw or inject liquid, and this hose is detachable, easy to clean and maintain.