As an Amazon Associate I earn from qualifying purchases.
Southwest speed 16mm o-ring low pressure return hose and 18mm high pressure line adapter kit # 150-2178kit | 1 high pressure line from pump to reservoir # 150-2178 | 3 Feet of Low Pressure Hose Black -6AN # 927-9586 | 1 Hose clamp # 940-2059 | 1 90 Degree Return Line Adapter -6an Fitting with hose clamp # 150-0098.
Spool valves > heavy duty gears > 20:1 gear ratio > 13/16"-36 Input Shaft > 1 1/8"-32 Spline Output Shaft > 2. 750" standard piston diameter > 18mm O-Ring Pressure Fitting > 16mm O-Ring Return Fitting. In. Southwest speed 1976-1986 jeep cj 5 3/4" power steering pump v-belt pulley # 149-1594 > pulley comes pre-pressed power steering pump > 5 3/4" steel pulley > v-belt style pulley | southwest speed 1976-1986 Jeep CJ High Strength Speed Pitman Arm # 107-1827 > Restores proper steering performance to help ensure vehicle control > OE Type Replacement part > Crafted from the strongest materials available | Southwest Speed 1976-1986 Jeep CJ Telescoping Steel Power Steering Shaft # 150-2861.
5 cc pump volume * -6 an Inlet on the tank & measures 4. 2" * tank has 8 ounce capacity. We have 30%, 6061-t6 aluminum denso mid-mount alternator bracket * anodized finish * includes all appropriate hardware and spacers that are necessary to mount the alternator | Serpentine Alternator Pulley: | * 3 1/2" Diameter * Single groove with 3 ribs * CNC machined, your specific application might call for you to speed up or slow down the water flow to cool the engine better.
This kit includes the cast iron Power Steering Pump, the Water Pump, and a one-wire Denso Alternator. These kits are perfect to equip the front of a small block chevy.
OEMTOOLS #ad - Works with many vehicles: this power steering pump pulley tool comes with two screws for use on most Ford, GM, Chrysler, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps; Pulls pulleys on GM belt-driven vacuum pumps.
Convenient storage: our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability; Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
Power steering pulley installer and remover: our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles; Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines. Product specifications: pulls any pulley with hub diameters measuring 1-1/8, 1-5/16, 1-1/4, or 1-3/8 inches; Pulls pulleys on GM belt driven vacuum pumps; Pulls pressed-on water pump pulleys of GM V6 engines.
Powerbuilt #ad - Made to be the most reliable tools in the market today. Storage case includes usage photos. Tool solutions for most all situations. Built to exceed tool standards. Kit 20 includes 14-piece for removal and installation of the power steering pump and alternator pulleys.
Southwest Speed #ad - The holley mid-mount accessory drive system is now offered for the serious racer in mind. Specs: accessory drive style: mid mount | application: gm ls | brand: holley | emission code: 5 | Engine: GM LS | Finish: Black | Inlet Size: 35.
4mm/1. 4" | material: aluminum | Product Type: Accessory Drive Kit. All three accessory solutions are for LS engines. If you need a front drive system for your ls engine race car, they are now available without air conditioning and power steering depending upon your needs! The mid-mount drive completes the holley trilogy of accessory solutions giving a third option compared to the High and Low-Mount previously released.
Note: steam tube input port is 1/8" NPT. Brand new holley black mid-mount accessory system, includes SD7 air conditioning compressor, alternator, crank damper & pulleys, tensioner, belt, power steering pump, Fits GM LS Engines Part #20-185BK.
A-Team Performance #ad - 6061-t6 billet aluminum steel Dampener and Power Steering Pump w/ Reservoir. Front drive serpentine Pulley Kit With Power Steering Reservoir.
Southwest Speed #ad - Brand new holley mid-mount accessory system, belt, tensioner, crank damper & pulleys, power steering pump, alternator, Includes SD7 air conditioning compressor, Fits GM LS Engines Part #20-185.
Note: steam tube input port is 1/8" NPT. Specs: accessory drive style: mid mount | application: gm ls | brand: holley | emission code: 5 | Engine: GM LS | Finish: Cast | Inlet Size: 35. 4mm/1. 4" | material: aluminum | Product Type: Accessory Drive Kit. The holley mid-mount accessory drive system is now offered for the serious racer in mind.
Southwest Speed #ad - 717-15 throttle body angle adapter - for GM LS and LT Intakes. Note: for lt applications: if installing on LT application refer to 21-5 LT installation kit instructions before proceeding.
Note: for all ls engine swaps-Please refer to your specific body style engine mount kits for additional modification and fitment requirements. Note: for installation onto an lt series engine, additional parts are required: 21-5 lt installation Kit for GM Gen V LT Accessory Drive | 22-100 LS Water Pump with forward facing outlet.
A-Team Performance #ad - Brackets and pulleys - cnc-machined from 6061-t6 aluminum in black finish. Gm type ii power steering pump — Designed for performance and reliability, meeting or exceeding OEM specifications.
160-amp gm cs130 style alternator — provides the electrical power with internal regulator, battery side post, and one-wire capability. Sanden sd7 style a/c Compressor — Pumps 6. 1 cubic inches per revolution with a maximum 9, 000 sustained RPM range.
1. Southwest Speed
#adSOUTHWEST SPEED POWER STEERING CONVERSION KIT,COMPATIBLE WITH 76-86 JEEP CJ5 CJ7,20:1 GEAR BOX,1400 SERIES POWER STEERING PUMP,V-BELT PULLEY,PITMAN ARM,TELESCOPING STEERING SHAFT,LINES,HOSES,FITTINGS
#adSouthwest Speed #ad - Southwest speed re-manufactured 1976-1986 jeep cj 1400 series performance power steering pump # 149-1622 > fits jeeps with 258/304/401 cu. Kit includes: | southwest speed re-manufactured 1976-1986 jeep cj replacement heavy duty power steering gear box # 105-2974 > engineered for superior durability > o-ring ports > O. E. Engines, as well as 4. 0 liter, with the oe can > re-manufactured > perfect pump for rock crawlers > 1400 Series Pumps are Identical to the 1300 Series Pumps but are manufactured with much stronger components > Larger Ring and rotor which displaces more fluid per revolution.Southwest speed 16mm o-ring low pressure return hose and 18mm high pressure line adapter kit # 150-2178kit | 1 high pressure line from pump to reservoir # 150-2178 | 3 Feet of Low Pressure Hose Black -6AN # 927-9586 | 1 Hose clamp # 940-2059 | 1 90 Degree Return Line Adapter -6an Fitting with hose clamp # 150-0098.
More information #ad
Southwest speed heavy duty manual to power steering gear box kit with 20:1 gear ratio, and 1400 series performance power steering pump that fits 1976-1986 Jeep CJ > This Southwest Speed Steering Gear Box Kit includes Southwest Speed Re-manufactured Heavy Duty Factory Replacement Power Steering Gear Box featuring a 20:1 Gear Ratio with 13/16"-36 Input Shaft, and 1 1/8"-32 Spline Output Shaft. Spool valves > heavy duty gears > 20:1 gear ratio > 13/16"-36 Input Shaft > 1 1/8"-32 Spline Output Shaft > 2. 750" standard piston diameter > 18mm O-Ring Pressure Fitting > 16mm O-Ring Return Fitting. In. Southwest speed 1976-1986 jeep cj 5 3/4" power steering pump v-belt pulley # 149-1594 > pulley comes pre-pressed power steering pump > 5 3/4" steel pulley > v-belt style pulley | southwest speed 1976-1986 Jeep CJ High Strength Speed Pitman Arm # 107-1827 > Restores proper steering performance to help ensure vehicle control > OE Type Replacement part > Crafted from the strongest materials available | Southwest Speed 1976-1986 Jeep CJ Telescoping Steel Power Steering Shaft # 150-2861.
| Brand | Southwest Speed #ad |
| Manufacturer | Southwest Speed #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 0 Pounds |
| Width | 0 Inches |
| Part Number | 105-2974_1622_1594 |
| Warranty | Parts |
More information #ad
2. Southwest Speed
#adNEW SMALL BLOCK CHEVY SERPENTINE FRONT ENGINE KIT WITH 1 TO 1 PULLEYS, AND BLOCK MOUNT BRACKET, POWER STEERING PUMP, RESERVOIR, DENSO ALTERNATOR AND BRACKET, WATER PUMP
#adSouthwest Speed #ad - Denso alternator bracket: | * CNC machined, which gives a 0% reduction. Complete k. R. C. It mounts the power steering pump to the Left side of the Block & features Pulleys with a 1 to 1 Ratio 0% Reduction. Includes: | aluminum water pump: | * short design * 3/4" shaft * lightweight aluminum construction * dual fan mounting bolt pattern | cast iron power steering pump with aluminum serpentine Pulley & -6 AN outlet on the pump * Pump features a flow valve that can easily be changed to adjust the feel of the steering * On the picture with the kit mounted to the engine, the pump is shown silver, but it is actually black * Pulley is lightweight aluminum & Bolt-On Aluminum Reservoir: | * 13.5 cc pump volume * -6 an Inlet on the tank & measures 4. 2" * tank has 8 ounce capacity. We have 30%, 6061-t6 aluminum denso mid-mount alternator bracket * anodized finish * includes all appropriate hardware and spacers that are necessary to mount the alternator | Serpentine Alternator Pulley: | * 3 1/2" Diameter * Single groove with 3 ribs * CNC machined, your specific application might call for you to speed up or slow down the water flow to cool the engine better.
More information #ad
Sbc block mount power steering pump bracket: | * bolts to the left side of the block on a sbc * high quality, nuts, & washers | serpentine water pump pulley: | * double groove pulley * 4" diameter rear groove with 6 ribs * 3 1/2" Diameter front groove with 3 ribs for the Alternator belt * Lightweight aluminum construction * Hard anodized for durability | Serpentine Crank Pulley: | * Single groove pulley with 6 ribs * 4" Diameter * Lightweight aluminum construction * Hard anodized for durability * 6 Rib Serpentine Belt to go around Power Steering Pump Pulley, lightweight aluminum construction * all surfaces are fully cnc machined * adjustable design * captured nut makes starting bolts easier * Comes with all necessary bolts, Water Pump Pulley, & Crank Pulley. This kit includes the cast iron Power Steering Pump, the Water Pump, and a one-wire Denso Alternator. These kits are perfect to equip the front of a small block chevy.
| Brand | Southwest Speed #ad |
| Manufacturer | KRC Power Steering #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 0 Pounds |
| Width | 0 Inches |
| Part Number | 57783 115 |
| Model | 57783 115 |
| Warranty | Parts |
More information #ad
3. OEMTOOLS
#adGreen, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Ford, VW , GM
#adConvenient storage: our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability; Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
More information #ad
Heavy-duty power puller: the pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability; Power steering pump pulley installer designed to tackle any small pulley job. Power steering pulley installer and remover: our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles; Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines. Product specifications: pulls any pulley with hub diameters measuring 1-1/8, 1-5/16, 1-1/4, or 1-3/8 inches; Pulls pulleys on GM belt driven vacuum pumps; Pulls pressed-on water pump pulleys of GM V6 engines.
| Brand | OEMTOOLS #ad |
| Manufacturer | OEMTOOLS #ad |
| Height | 1 Inches |
| Length | 1 Inches |
| Width | 1 Inches |
| Part Number | 37031 |
| Model | 37031 |
| Warranty | OEMTOOLS Limited Lifetime |
More information #ad
4. Powerbuilt
#adStorage Case, 648605, Car Repair Tools, Powerbuilt Power Steering and Alternator Pulley Remove and Install Tool Set, Replace Vehicle Steering Pump
#adMore information #ad
For use on most power steering pump pulleys. Tool set for removal and installation of power steering pump and alternator pulleys. Includes special installer adapters, puller assembly with thrust bearing, jaw and sleeve. For pulling and installing power steering pump and alternator pulleys.| Brand | Powerbuilt #ad |
| Manufacturer | Alltrade Tools #ad |
| Height | 7.25 Inches |
| Length | 3 Inches |
| Weight | 2 Pounds |
| Width | 9.25 Inches |
| Part Number | 648605 |
| Model | 648605 |
More information #ad
5. Southwest Speed
#adNEW HOLLEY BLACK MID-MOUNT COMPLETE ACCESSORY SYSTEM WITH SD7 A/C COMPRESSOR,ALTERNATOR,POWER STEERING PUMP,TENSIONER,BELT,CRANK DAMPER & PULLEYS,COMPATIBLE WITH GM LS ENGINES
#ad4mm/1. 4" | material: aluminum | Product Type: Accessory Drive Kit. All three accessory solutions are for LS engines. If you need a front drive system for your ls engine race car, they are now available without air conditioning and power steering depending upon your needs! The mid-mount drive completes the holley trilogy of accessory solutions giving a third option compared to the High and Low-Mount previously released.
More information #ad
Note: steam tube input port is 1/8" NPT. Brand new holley black mid-mount accessory system, includes SD7 air conditioning compressor, alternator, crank damper & pulleys, tensioner, belt, power steering pump, Fits GM LS Engines Part #20-185BK.
| Brand | Southwest Speed #ad |
| Manufacturer | HOLLEY PERFORMANCE PRODUCTS #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 0 Pounds |
| Width | 0 Inches |
| Part Number | HOL-20-185BK |
More information #ad
6. A-Team Performance
#adA-Team Performance, Compatible with Chevy GM LS LS1 LS2 LS6 GM Chevrolet 5.7L 6.0L, Front Drive Serpentine Pulley Kit With Power Steering Reservoir
#adMore information #ad
A/c compressor Manifold Tensioner. A/c compressor sanden sd-7 Style. Compatible with chevy gm ls ls1 ls2 ls6 GM Chevrolet 5. 7l 6. 0l. Water pump alternator High Output One-Wire 160 Amps.| Brand | A-Team Performance #ad |
| Manufacturer | A-Team Performance #ad |
| Part Number | 81200X-KT |
More information #ad
7. Southwest Speed
#adNEW HOLLEY MID-MOUNT COMPLETE ACCESSORY SYSTEM WITH SD7 A/C COMPRESSOR,ALTERNATOR,POWER STEERING PUMP,TENSIONER,BELT,CRANK DAMPER & PULLEYS,COMPATIBLE WITH GM LS ENGINES
#adNote: steam tube input port is 1/8" NPT. Specs: accessory drive style: mid mount | application: gm ls | brand: holley | emission code: 5 | Engine: GM LS | Finish: Cast | Inlet Size: 35. 4mm/1. 4" | material: aluminum | Product Type: Accessory Drive Kit. The holley mid-mount accessory drive system is now offered for the serious racer in mind.
More information #ad
All three accessory solutions are for LS engines. If you need a front drive system for your ls engine race car, they are now available without air conditioning and power steering depending upon your needs! The mid-mount drive completes the holley trilogy of accessory solutions giving a third option compared to the High and Low-Mount previously released.| Brand | Southwest Speed #ad |
| Manufacturer | HOLLEY PERFORMANCE PRODUCTS #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 0 Pounds |
| Width | 0 Inches |
| Part Number | HOL-20-185 |
More information #ad
8. Southwest Speed
#adHOLLEY LS/LT COMPLETE ACCESSORY DRIVE KIT,BLACK,INCLUDES SD508 A/C COMPRESSOR,ALTERNATOR,POWER STEERING PUMP,BELT & PULLEYS,HIGH MOUNT ACCESSORY DRIVE STYLE
#adNote: for all ls engine swaps-Please refer to your specific body style engine mount kits for additional modification and fitment requirements. Note: for installation onto an lt series engine, additional parts are required: 21-5 lt installation Kit for GM Gen V LT Accessory Drive | 22-100 LS Water Pump with forward facing outlet.
More information #ad
Brand new holley ls/lt complete accessory Drive Kit Holley Part #20-137BK. Note: this bracket requires an installation kit for assembly Part 21–1, OR 21–3, 21–2, see instructions for the correct installation kit for your application.| Brand | Southwest Speed #ad |
| Manufacturer | HOLLEY PERFORMANCE PRODUCTS #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 0 Pounds |
| Width | 0 Inches |
| Part Number | HOL-20-137BK |
More information #ad
9. A-Team Performance
#adA-Team Performance, Small Block Serpentine Front Drive System, Compatible with Chevy Black, Water Pump, Complete With Brackets and Pulleys, Alternator, A/C Compressor and Power Steering Reservoir
#ad160-amp gm cs130 style alternator — provides the electrical power with internal regulator, battery side post, and one-wire capability. Sanden sd7 style a/c Compressor — Pumps 6. 1 cubic inches per revolution with a maximum 9, 000 sustained RPM range.
More information #ad
Mechanical water pump - made from lightweight A356 aluminum which provides extra cooling power to high-performance engines. Small block serpentine front drive system - complete With Brackets and Pulleys, Water Pump, Alternator, A/C Compressor and Power Steering Reservoir, Black. Compatible with chevrolet small Block SBC V8 GEN. I please check description for more compatibility information.| Brand | A-Team Performance #ad |
| Manufacturer | A-Team Performance #ad |
| Part Number | DS35014BKX |
More information #ad
10. Allstar
#adKit ALL48242, Allstar Power Steering Pump, Block Mount/Tank/V-Belt Pulley Included, Small Block Chevy, 1300 psi, GM Type 2, 3 gpm
#adAllstar #ad - Product type :AUTO_PART. Country of origin :United States. Fit type: Vehicle Specific. Package weight :9. 15lbs. Package dimensions :36. 576 cm l x 21. 59 cm w x 2032 cm H.More information #ad
| Brand | Allstar #ad |
| Manufacturer | Allstar Performance #ad |
| Height | 176.4 Inches |
| Length | 99.6 Inches |
| Weight | 9 Pounds |
| Width | 102 Inches |
| Part Number | ALL48242 |
| Model | ALL48242 |
| Warranty | 90 day |
More information #ad
