Top 10 Pilot Bushing Removal Tool – Puller Sets

As an Amazon Associate I earn from qualifying purchases.



Fits 5/8” x 18” or 3/4” x 16” Threaded Rods , OEMTOOLS 27059 Pilot Bearing Puller Attachment, Pilot Bearing and Bushing Removal, Black

OEMTOOLS #ad - Easy to use: the slide hammer bearing puller can be used in four steps: Insert the pilot bearing puller, attach a slide hammer, turn the attachment housing expanding both jaws against the pilot bearing, and use the slide hammer to remove the bearing.

Variety of uses: not only can this pilot bearing tool be used as a bearing puller, but it can also be used as a bushing tool on starters and generators; This pilot bearing removal tool will also fit any 5/8” x 18” or 3/4” x 16” threaded rods. Save money: getting a pilot bearing replaced in an auto shop could cost you up to $650; You can save hundreds of dollars by using this one pilot puller.

Durable: made from steel, this bearing and bushing removal tool can withstand years of regular pilot bearing jobs; This blind hole bearing puller is built to last. The blind bearing puller is also easy to wield, weighing in at just 13. 6 ounces, making it a great pilot tool. Dimensions: this pilot bearing remover is easy to store anywhere at just 104" x 3. 4" x 1. 3".
ManufacturerGreat Neck Saw #ad
Height1 Inches
Length1 Inches
Weight0.85 Pounds
Width1 Inches
Part Number27059



DASBET 5pc Blind Hole Pilot Bearing Gear Puller Slide Hammer Removal Tool

DASBET #ad - If you think the item you received is used, please contact us for a replacement. Bearing extractor collets with internal Capacity From 3/8" 10mm To 1-1/4" 32mm. Form fitted case is included for storage and organization. Bearing extractor 1: 3/8" to 1/2" 10mm-14mm ;bearing Extractor 2: 9/16" to 11/16" 15mm-19mm. Bearing extractor 3: 5/8" to 1" 18mm-25mm ;bearing Extractor 4: 1" to 1-1/4" 25mm-32mm. Our products are 100% brand new. Open clamps by turning handle clockwise To Snug Against The Bearing For Pulling Out Evenly Without Damage The Parts.
BrandDASBET #ad
ManufacturerDASBET #ad
Height3.15 Inches
Length15.16 Inches
Width11.42 Inches
Part NumberZ0073

3. Powerbuilt


Silver, Powerbuilt 648619 Pilot Bearing Puller

Powerbuilt #ad - Kit 8 includes 1-piece for removal of pilot bearing and bushings from the flywheel during clutch replacement. Heavy duty puller with 1 1/2-Inch fingers for an extra deep reach. Plated steel and black oxide. Tool set for removal of the pilot bearing and bushings from the flywheel during clutch replacement. Tool solutions for most all situations. Made to be the most reliable tools in the market today. Built to exceed tool standards. Storage case includes usage photos.
BrandPowerbuilt #ad
ManufacturerAlltrade Tools #ad
Height7.25 Inches
Length2.88 Inches
Width9.13 Inches
Part Number648619

4. Orion Motor Tech


16PCS, Orion Motor Tech Blind Hole Collet Bearing Race and Seal Puller Extractor Kit, Slide Hammer Pilot Insert Inner Internal Bearing Removal Tool Set

Orion Motor Tech #ad - Collets made of chrome molybdenum steel ensure rust-proof performance and long-lasting using. Perfect for professional and diy use, ideal for pulling jobs and will not damage parts in using, perfect for professional and DIY use.

Portability, comes with a durable storage case, you can neatly collect the tools and easily bring it to anywhere you like. Easy to use, this kit is easy to use, just insert the collect and expand it to fit the hole. Durability, this bearing puller set features high hardness and toughness for optimal performance. Wide compatibility, blind / internal /bearing puller, comes with various size and type of collets, this tool set boasts wide compatibility.
BrandOrion Motor Tech #ad
ManufacturerOrion Motor Tech #ad
Height4.72 Inches
Length18.5 Inches
Width12.59 Inches
Part NumberOMT-BJS000100
Warranty2 Years Warranty, Free Replace or Full Refund



ATPEAM Blind Hole Collet Bearing Race and Seal Puller Extractor Kit | 16PCS Slide Hammer Pilot Insert Inner Bearing Removal Tool Set

ATPEAM #ad - Package includes: 1 x sliding hammer, 18-23mm, 34-38mm, 1 x counter stay puller.10 x collects segment grip type: 8-11mm, 12-17mm, 44-48mm, M10 x 1.5 to m8 x 1. 25, 54-58mm. East to use: just simply insert the appropriate collet; turn the nut to expand it until it takes good hold of the inner bearing race; and slide the hammer's weight towards the handle to knock out the bearing.

Wide application: blind hole pilot bearing internal extractor puller w/ slide hammer removal tool kit ideal for pulling jobs, against the bearing for pulling out evenly without damage the parts, and perfect for professional and DIY use. Durable: the bearing puller set has high hardness and toughness.

Collets are made from chrome molybdenum steel, and rust-proof finish of tool set for long-lasting using. Thread: m10 x 1. 5, 1 x 2. 5 jaws puller, 24-29mm, 30-34mm, 39-43mm, 3 x screw adaptors, 49-53mm, M10 x 1.5 to m6 x 1. 0 . Wide compatibility: this bearing puller set comes with various size and type of collets, Blind / Internal /Bearing Puller, this tool set boasts wide compatibility.
BrandATPEAM #ad
ManufacturerATPEAM #ad
Height4 Inches
Length16 Inches
Width13 Inches
Part NumberAE-18-24

6. OTC


OTC 1170 2-Jaw Pilot Bearing/Bushing Puller with Slide Hammer

OTC #ad - Hammer and 1/2-20 threaded end. Slide hammer unit measures 17 inches long with a 1-3/4 lb. Versatile puller built specifically for light duty inside pulling jobs - particularly for removing flywheel pilot bearings and bushings from automobiles, trucks, and tractors. High-grade materials ensure quality performance over the lifetime of the tool. Also useful for pulling electric motor, generator, and magneto bearings. Reach is 3/4 inch; spread is 1/2 inch to 1-1/2 inches; weighs 4 lbs. 14 oz.
BrandOTC #ad
ManufacturerOTC #ad
Height1.8 Inches
Length20.8 Inches
Weight3.7 Pounds
Width3.3 Inches
Part Number1170
WarrantyLimited lifetime warranty

7. Lisle


Lisle 55600 Clutch Pilot Bushing Remover

Lisle #ad - Not for use on steel bearings. Screw the self-tapping tip 2-3 threads into the brass or bronze bushing. Fits brass or bronze bushings from 1/2 inch to 3/4 inch inner diameter. Uses hydraulic pressure to remove brass and bronze bushings.
BrandLisle #ad
ManufacturerLisle #ad
Height1.6 Inches
Length5.7 Inches
Weight0.25 Pounds
Width4.1 Inches
Part Number55600

8. Orion Motor Tech


Slide Hammer Pilot Insert Inner Bearing Removal Tool Set, Orion Motor Tech Blind Hole Collet Bearing Race and Seal Puller Extractor Kit, 16 Pieces

Orion Motor Tech #ad - Heavy-duty construction: these wheel bearing removal tools are made from 45# steel forged and galvanized for long-term durability under even punishing use; the collets in particular are chrome moly steel to handle even the most stubborn blind bearings and bushings without trouble.

Blow-molded case: the custom blow-molded case keeps everything organized and easy to carry or store as needed. Wide application: this internal bearing puller set's expandable collets and threaded screw adapters remove tight and jammed axles, bearings, and bushings on a wide variety of vehicles without damaging the removed parts. Easy to use: for most parts, lock it into the inner race, and pull the slide hammer's weight back to easily knock out the bearing or bushing; for tighter or more delicate operation, just fit the appropriate collet, the counterstay can be slowly tightened to more carefully extract the part.

16-piece set: this blind bearing puller set by orion motor tech includes a slide hammer, spare pin bolt, counterstay puller, 3 screw adapters, and 10 split collets to get all your work done on parts from 1/4 to 2-1/3 inch diameter 6-59 mm.
BrandOrion Motor Tech #ad
ManufacturerOrion Motor Tech #ad
Part NumberZX01-BL



8MILELAKE Pilot Bearing Puller 3 Jaw Bushing Gear Extractor Wheel Bearing Pullers Set

8MILELAKE #ad - Protection:forged and heat treated steel jaws, Three jaw design applies even pressure preventing damage to bearings, Corrosion-resistant black oxide finis. Design:structure design, gently turning the small wrench can produce a strong pull force. Material:the overall use of chromium vanadium just manufacturing, good toughness, high hardness, strong and durable. Size: 200x135mm. Specified range:removes all sleeve-type bearings with 1/2"-2"inside diameter.
Brand8MILELAKE #ad
Manufacturerfreebirdtrading #ad
Height1.38 Inches
Length4.72 Inches
Width1.38 Inches
Part NumberJJ326

10. OTC


OTC 4422 Bridge Style, 2-Jaw Pilot Bearing/Bushing Puller with Tee-Handle

OTC #ad - High-grade materials ensure quality performance over the lifetime of the tool. Spread ranges from 1/2 inch to 1-1/2 inches; reach has a minimum/maximum range of 3/16 inch to 1-1/4 inches. Use to pull a pilot bearing or bushing from the end of the crankshaft. Tee handle' design is easy-to-use and eliminates need for other tools to drive the puller. A restriction plate catches the bridge and prevents the jaws from spinning when force is engaged.
BrandOTC #ad
ManufacturerOTC #ad
Height1.7 Inches
Length7.7 Inches
Weight2.3 Pounds
Width3.4 Inches
Part Number4422
WarrantyOne Year Limited Warranty