As an Amazon Associate I earn from qualifying purchases.



Cable type: impedance: 50 ohm | rf cable type: RG58 | Cable Length: 1m/3. 28". Work for wouxun, used for antennas, linton etc two-way radio, baofeng, ham radio transceiver, coaxial cable, Quasheng, radio scanner, uniden base/mobile scanner scanners, CB Radio Handheld & Amateur Radio Equipment, for UHF VHF Coax NMO Mount Cable Car Truck Hood install by tram-browning.



The larsen nmoK mount does not have any problem. Fits these vehicles: chevrolet avalanche 2007-2013, tahoe 2007-2013 gmc sierra 1500: 2007-2013, silverado 1500: 2007-2013, 3500: 2007-2014, sierra 2500, Suburban 2007-2013, 3500: 2007-2014, silverado 2500, Yukon and Denali: 2007-2014.3

Gmc sierra 1500: 2014 -2018 sierra 2500, 3500: 2015 -2018 you may need to trim a rubber weather strip for access to the fender bolt and proper fitting of the bracket.
Note: for stability, our brackets are made of 14 gauge stainless steel. Most nmo mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place. The larsen nmoK mount does not have any problem.

The larsen nmoK mount does not have any problem. Fits these vehicles: ford f-150: 2009-2014, Expedition: 2009-2014.

1. Tram
#ad
Tram 1235 3 1/4" Magnet with NMO Mounting, Gold, 17ft Cable with PL-259
#adTram #ad - Nmo mount with gold-plated contact pin. Installed pL-259 male connector. Included components: product. 17ft low loss rg-58 a/u coaxial cable with tinned copper braid 95%, solid insulation & stranded tinned copper center conductor.More information #ad
Brand | Tram #ad |
Manufacturer | Tram-Browning #ad |
Height | 2 Inches |
Length | 6.1 Inches |
Weight | 1.2 Pounds |
Width | 6 Inches |
Part Number | 1235 |
Model | 1235 |
Warranty | 90 days |
More information #ad
2. Midland
#ad
Works with Midland MicroMobile MXT105, MXT115, MXT275, MXT400, Midland Antenna Mag Mount with NMO Connector and 12 Foot Cable
#adMidland #ad - Cable length: 12 ft Silver. Specific frequency: 0 - 1000 MHz. For use with microMobile antennas. Includes rubber boot. Antenna not included. Cable type: rg-58A/U.More information #ad
Brand | Midland #ad |
Manufacturer | Midland #ad |
Weight | 1.52 Pounds |
Part Number | MXTA12 |
Model | MXTA12 |
More information #ad
3. Diamond
#ad
Diamond K400S-NMO Lip mount, 2-axis adjustable Antenna Vehicle Mount
#adDiamond #ad - 2-axis adjustment provides placement flexibility. No holes / Drilling Required. Nmo to sma with 13. 5' rg-316 teflon coax cable. Rubber pad protects mounting surface - Recommended for larger antennas. Strongest, most universal, style of mobile mount.More information #ad
Brand | Diamond #ad |
Manufacturer | Diamond #ad |
Height | 2 Inches |
Length | 6 Inches |
Weight | 1.08 Pounds |
Width | 5 Inches |
Part Number | K400SNMO |
Model | K400SNMO |
More information #ad
4. Superbat
#ad
Superbat Nmo Antenna Mount to PL-259UHF Male Cable RG58 1M Extension Cable with L-Bracket + SO239 to BNC Adapter + SO239 Coupler for Yaesu Kenwood HYT Vertex Icom Trunk Mobile Radios 1PS
#adSuperbat #ad - Type:pl259uhf male to nmo mount coax cable + nmo l-bracket + sO239 to BNC Adapter + SO239 Coupler Connector KIT. Cable type: connector a: uhf plug, male pin | Connector B: NMO Mount | Impedance: 50 Ohm.Cable type: impedance: 50 ohm | rf cable type: RG58 | Cable Length: 1m/3. 28". Work for wouxun, used for antennas, linton etc two-way radio, baofeng, ham radio transceiver, coaxial cable, Quasheng, radio scanner, uniden base/mobile scanner scanners, CB Radio Handheld & Amateur Radio Equipment, for UHF VHF Coax NMO Mount Cable Car Truck Hood install by tram-browning.
More information #ad
We are confident in the quality of our Cable and willing to provide 1 MONTHS Replacement Warranty and 100% Satisfaction Guarantee. Never worry about any security problems. If you unfortunately get a defective one, please contact our customer support.Brand | Superbat #ad |
Manufacturer | wlaniot #ad |
Part Number | GP-KIT-HAM-06 |
More information #ad
5. Tram
#ad
Tram 1241 5" NMO Magnet Mount, Black
#adTram #ad - Soft rubber boot on magnet for scratch protection. Gold-plated solid brass contact pin. Solid-brass black NMO mount. Precision uhf male PL-259 connector with strain relief.More information #ad
17ft rg58a/u low-loss precision coax cable, tinned copper braid 95% shield, solid insulation & stranded tinned copper center conductor.Brand | Tram #ad |
Manufacturer | Tram-Browning #ad |
Height | 1.5 Inches |
Length | 5.25 Inches |
Weight | 2.55 Pounds |
Width | 5.25 Inches |
Part Number | 1241 |
Model | 1241 |
Warranty | 90 days |
More information #ad
6. UTV Products
#ad
UTV INC Polaris RZR Two Way Radio NMO Antenna Mount
#adUTV Products #ad - Fits most nmo antennas For Two Way Radios. Cnc laser cut 1/8" Steel. Mounts up to oem Locations In Bed. Powder coated Black For Durability. Fits 2014 + polaris rzr xp 1000 and Turbo SXS Models.More information #ad
Brand | UTV Products #ad |
Manufacturer | UTV INC #ad |
Part Number | 3696 |
More information #ad
7. Comet Antennas
#ad
Comet Antennas CVANTPF Vehicle Specific Fender Bracket Antenna Mount No Holes to Drill for Chevrolet/GMC Trucks
#adComet Antennas #ad - Note: for stability, our brackets are made of 14 gauge stainless steel. Most nmo mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place.The larsen nmoK mount does not have any problem. Fits these vehicles: chevrolet avalanche 2007-2013, tahoe 2007-2013 gmc sierra 1500: 2007-2013, silverado 1500: 2007-2013, 3500: 2007-2014, sierra 2500, Suburban 2007-2013, 3500: 2007-2014, silverado 2500, Yukon and Denali: 2007-2014.3
More information #ad
3/4″ hole accepts the standard nmo mount, or choose a comet so-239 type cable assembly which includes a large washer and jam nuts to keep the 5/8″ SO-239 from falling through the 3/4″ hole. Drivers side installation only. Uses the existing fender bolt, the bracket fits between the hood and fender gap.Brand | Comet Antennas #ad |
Manufacturer | CVANTPF #ad |
Weight | 0.2 Pounds |
Part Number | CVANTPF |
Model | CVANTPF |
More information #ad
8. Comet Antennas
#ad
Comet Antennas CV2ANTNCG Vehicle Specific Fender Bracket Antenna Mount No Holes to Drill for Chevrolet/GMC Trucks
#adComet Antennas #ad - 3/4″ hole accepts the standard nmo mount, or choose a comet so-239 type cable assembly which includes a large washer and jam nuts to keep the 5/8″ SO-239 from falling through the 3/4″ hole. Drivers side installation only.Gmc sierra 1500: 2014 -2018 sierra 2500, 3500: 2015 -2018 you may need to trim a rubber weather strip for access to the fender bolt and proper fitting of the bracket.
More information #ad
Uses the existing fender bolt, the bracket fits between the hood and fender gap. Fits these vehicles: chevrolet silverado 1500: 2014 -2018 silverado 2500, 3500: 2015 -2016 you may need to trim a rubber weather strip for access to the fender bolt and proper fitting of the bracket. Note: for stability, our brackets are made of 14 gauge stainless steel. Most nmo mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place. The larsen nmoK mount does not have any problem.
Brand | Comet Antennas #ad |
Manufacturer | CV2ANTNCG #ad |
Weight | 0.25 Pounds |
Part Number | CV2ANTNCG |
Model | CV2ANTNCG |
More information #ad
9. Comet Antennas
#ad
Comet Antennas FO2ANTPF Vehicle Specific Fender Bracket Antenna Mount No Holes to Drill for Ford Trucks
#adComet Antennas #ad - Drivers side installation only. Note: for stability, our brackets are made of 14 gauge stainless steel. Most nmo mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place.The larsen nmoK mount does not have any problem. Fits these vehicles: ford f-150: 2009-2014, Expedition: 2009-2014.
More information #ad
Uses the existing fender bolt, the bracket fits between the hood and fender gap. 3/4″ hole accepts the standard nmo mount, or choose a comet so-239 type cable assembly which includes a large washer and jam nuts to keep the 5/8″ SO-239 from falling through the 3/4″ hole.Brand | Comet Antennas #ad |
Manufacturer | FO2ANTPF #ad |
Weight | 0.25 Pounds |
Part Number | FO2ANTPF |
Model | FO2ANTPF |
More information #ad
10. AEcreative
#ad
AEcreative Low Profile NMO Mount Wide-Band Mobile Scanner Receive Antenna Whip for Uniden Bearcat RadioShack Motorola
#adAEcreative #ad - Receive frequency: 50mhz - 1200 MHz, antenna overall height: 4". Low-profile antenna whip, low profile design for less obvious when mount on car roof, please keep in mind short antenna performance will not as good as longer antenna, fit Motorola NMO type antennat base.More information #ad
Package include: 1x nmo type antenna whip, NMO antenna base not included.Brand | AEcreative #ad |
Manufacturer | AEcreative #ad |
More information #ad