As an Amazon Associate I earn from qualifying purchases.
1. VSTM #ad
VSTM OBD II Vehicle ECU Emergency Power Supply Cable Memory Saver 3Meter with Alligator Clip-On 12V Car Battery Cigarette Lighter Power Extension Socket #adVSTM #ad
- That means the vehicle may feel different when driven, however, and you may have to enter a security code to access the stereo. You can replace the battery. As our device with 3 meter cable, it will be a convenient way, should you not have jump starter or Lead-acid battery on hand, and the device can also get the 12v power supply from cigarette lighter of another good car.
Preserves vehicle codes and electronic presets. Late-model vehicles, rely on computers that operate everything from the stereo to the transmission. If power is lost to the computer, the settings are lost and have to reset to default.
Using this simple memory saving device when replacing your car battery will help you avoid these problems. 8 amp fuse built into the memory saver, better reliable on overload protection. In this way, also by get the alternative 12V power source from another car, ours are gold plating.
Powered by any jump starter with a 12V outlet into an OBD II Memory Saver. Replacing a car battery on older vehicles used to be simple!! You unhook the old battery and install the new one. Just insert the cigarette lighter plug to this car and insert into 16 pin plug to the OBD port of the car you want to replace battery. This device can work with any 12v dc power source, including jump starter, DC 12V Lead-acid battery, or another car’s DC 12V power outlet.
2. Clore Automotive #ad
SOLAR ESA30 OBD II Memory Saver Connector #adClore Automotive #ad
- Led confirms a proper connection has been made to the OBDII port. Prevents electronic memory loss when disconnecting a vehicle's battery. Interface connector between a jump starter and a vehicle's OBD II port. Turns any jump starter with a 12v power port into a memory saver.
|Brand||Clore Automotive #ad|
|Manufacturer||Clore Automotive #ad|
|Warranty||90 Day Limited|
3. Mem Retain #ad
OBD ll Connector Vehicle Memory Saver Reliable and Easy 9 Volt Battery Powered #adMem Retain #ad
- Much more reliable than similar 12v Cigarette outlet models -- Assembled in the USA. Retains radio presets, bluetooth devices, Diagnostic codes and learned procedures up to 2 hours.
Instructions are included for perfect results - Uses 9 volt battery Not Included. Safe voltage blocking diode installed for safe 9 volt battery use. For maintaining voltage continuity to engine computer, clock and radio memory when vehicle battery is disconnected.
4. Schumacher #ad
12V, Save Your Vehicle Settings During Battery Removal, Schumacher Memory Saver Adapter Cable #adSchumacher #ad
- 3 feet long cable assembly that plugs an external power source into the vehicle's OBDII port. Lightweight and easily transportable. Preserves the stored fault codes and programmed electronic settings such as clocks, seat positions, and alarms.
|Warranty||1 Year Warranty|
5. EZRED #ad
EZRED MS4000 Automotive Memory Saver With Built In Charger #adEZRED #ad
- Innovation at its finest: we make high quality hand tools & work lights. Protects & saves: this unit is protected by a 4 amp circuit breaker & can be used for anti-theft radios, gps memory, clocks, alarms, cell phone settings, keyless entry systems, TPMS & other memory-related functions.
We specialize in tools for battery, ratchet sets, LED flashlights & electrical work, tool organizers, heating & accessories, for both the professional tradesperson and home DIY'er!.
Memory saver & charger: the ms4000 saves all drive-ability codes & settings when disconnecting/changing a vehicle's starter battery. It also protects settings & codes for anti-theft radios, clocks, keyless entry systems & much more.
Get the job done with EZRED tools! The ezred difference: leading with innovation, our focus is to design, manufacture & durable professional grade tools & deliver the most functional & lights. Charges batteries: a 12 volt, 4. 5 amp hour sealed lead acid battery is included inside the unit. The direct wired obdii connector plugs directly into the vehicles OBDII port.
|Manufacturer||E-Z Red #ad|
|Warranty||Limited One Year Warranty|
6. Powerbuilt #ad
Powerbuilt 648539 Computer Memory Keeper #adPowerbuilt #ad
- For maintaining voltage continuity to engine computer, clock and radio memory when vehicle battery is disconnected. Retains radio presets, ECM codes and learned procedures up to four hours.
Plugs into vehicle’s cigarette lighter outlet. Plugs into vehicle's cigarette lighter outlet. Retains radio presets, ECM codes and learned procedures up to four hours. Maintains voltage continuity to engine computer, clock and radio memory.
|Manufacturer||Alltrade Tools, LLC #ad|
7. OLLGEN #ad
OLLGEN 3M/10ft OBD II Vehicle ECU Emergency Power Supply Cable Memory Saver with Alligator Clip-On 12V Car Battery Cigarette Lighter Power Socket Extension Cable #adOLLGEN #ad
- It is used as a convenience as to not erase the memory. Easy to replace :should you not have jump starter or lead-acid battery on hand, and the device can also get the 12v power supply from cigarette lighter of another good car. Super long 10ft 3meters cable: plenty long until you try connecting it to another car's battery or cigarette lighter.
Preserves vehicle codes and electronic presets. It is used to keep the memory of you radio setting and other memory computer controlled devices on the vehicle EMCU for example. Cigarette lighter with alligator to obd2 16 pin male connector power cable :powered by any jump starter with a 12v outlet into an obd ii memory Saver.
Plug it into the obd male connector of the vehicle, including jump starter, plugging the cigarette connector into the clip cords, hooking it up to a 12V battery source. Note:this device can work with any 12v dc power source, DC 12V Lead-acid battery, or another car’s DC 12V power outlet.
Replacing a car battery on older vehicles used to be simple!! You unhook the old battery and install the new one. In this way, also by get the alternative 12V power source from another car, you can change your car battery, when you not have a jump starter on hand.8 amp fuse built into the memory saver, better reliable on overload protection. Interface connector between a 12V DC power source and vehicle's OBD II port. It is not needed or required to change your battery.
8. ALLOSUN #ad
1 Pack, ALLOSUN All-Sun GK504 Automotive Setting Keeper Auto Vehicle Computer Memory Saver #adALLOSUN #ad
- Offering a convenient, easy way to save memory data of on-board computers. Featuring convenient ability to plug into any vehicle cigarette lighter. Includes a rugged cable designed for durability. Requires 9-volt Alkaline battery not included. Ruggedly designed hard plastic body.
9. Arteckin #ad
OBD 2 Vehicle Emergency Booster Jumper Starter Power Supply Cable Memory Saver with Alligator clamp 12V Car Battery Cigarette Lighter Extension Cable 10ft /3m #adArteckin #ad
- 10ft/3m cables, can work with both battery and car directly. Thick wire 18awg. 8a fuse inside the cable. This product includes 1pcs cigar lighter cable & 1pcs clamp cable & 1pcs EC5 cable, just like in the picture.
If power input with incorrect polarity, the electric power will not be connected to your car. Reverse-connection protection. Our cables are much safer. Used to get alternative 12v power supply from another car or another battery.
10. FASLINK #ad
FASLINK OBD2 Memory Saver Cable OBDII Connector with 2 Alligator Clips,car OBD Computer ECU Memory Saver Replace Battery Safe Tool for car Memory Saver 12v #adFASLINK #ad
- Preserves vehicle codes and electronic presets, This will be a better choice. Material: compared by most of obd11 pro in market, the flexibility is not easy to burn broken, silicone flame retardant cable, ours are using the high-quality copper wire, we are keen on the details to ensure the brand quality and the good custome buying experience.
Preserves vehicle codes and electronic presets. Suitable for cars: work no problem as all odbii ports, it works on any vehicle with OBDII which is 1996 and later.
Better protect your car: the memory saver, better reliable on overload protection. Powered by starter with a 12V outlet into an OBD IIr car memory saver. It is used to keep the memory of you setting and other car memory saver controlled devices on the vehicle.
Avoid information loss: keep the car computer memory dashboard information, memory seats, acoustics, digital clock etc. Easy to operating: using this simple method, just insert theTwo shelvesre spectively plug to battery and insert into 16 pin plug to the OBD port of the car you want to replace battery. Instructions are included in the package）.