As an Amazon Associate I earn from qualifying purchases.
1. ABN #ad
Single, Copper Tube, Double Flare Tool Kit for Steel, Bubble, ABN Professional Brake Line Flaring Tool Kit, 45 Degrees #adABN #ad
- Use your vise: use on a bench-mounted vise in your workshop or on a hitch-mounted vise in the field not intended for use under car; 6-inch 15. 2 cm t-handle screw clamp holds die and tube in place so you can create flares quickly and easily.
Fits your application: 45-degree set creates single, transmission cooler lines, bubble, aluminum brake lines, stainless steel, 5/16-inch 8mm, and double flares on steel, and fuel lines; For 3/16-inch 4.7
75mm, and soft metal copper, 1/4-inch 6. 35mm, and 3/8-inch tubing. Package contents: brake line flare kit includes 1 brake line flare tool with t-handle and 11-inch lever with 5-inch texturized rubber sleeve 27.
9x12. 7 cm, 1 instruction manual, 4 end dies, and 1 14.1 x 6. 1 x 3. 5 inch 35. 8x15. 5x8. 9 cm plastic blow-molded carrying case. Durability you need: deburred square pipe end with outer edge chamfered approximately 025 x 45 degrees; Each die block is 1.
2. 4LIFETIMELINES #ad
2 Flaring Bars, & Storage Case, 4LIFETIMELINES Professional Brake Line Flare Kit for Single, 12 Flaring Dies, Tubing Cutter, Tubing Reamer, Double SAE Flares & Bubble ISO Flares #ad4LIFETIMELINES #ad
- Creates single, double inverted sae flares and bubble ISO flares up to 0040" wall thickness. Includes flaring dies for all sizes: 3/16, 5/16, 8mm, 7/16, 3/8, 6mm, 5/8, 4.
75mm, 1/2, 1/4, 10mm. Designed to perform flares on thin wall steel, aluminum, copper, and nickel-copper tubing. Contents include: 1 sae forged alloy steel flare bar, 1 tubing reamer 3mm-12mm, 1 tubing cutter 1/8" to 5/8" OD, 1 metric forged alloy Steel Flare Bar, 1 self centering premium yoke, 13 Hardened Flare Die Heads, 1 Rigid Plastic Storage & Carrying Case.
This is a professional tool, please read instructions before using. Self-centering premium yoke has corresponding slots to hold bar assembly tightly in place during flaring operation.
3. Wostore #ad
Auto Double Flaring Tool Kit Copper Aluminum Brake Line and Brass Tubing Tools 45 Degree Flares #adWostore #ad
- Blow molded hard plastic storage case keeps tools contained and organized, provides a convenient handle for easy transportation and portability, provide instruction for easy use.
Heavy duty yoke is forged from heat treated steel to ensure durability and strength. Swivel is constructed out of alloy steel and chrome plated to assist in reducing friction. Double flaring copper aluminum soft steel brake line tubing tool kit including 1 flaring cone, 1 flaring yoke and 5 adapters; Wide range of sizes - 3/16, 9.
5, 1/4, 3/8 and 1/2 inch 4. 8, 7. 9, 5/16, 6. 4, and 12. 7 mm. Designed to use when flaring double or single flare in copper, magnesium, aluminum, and brass tubing as well as soft steel brake line tubing.
4. Shankly #ad
Professional Grade Heavy Duty Brake Line Flaring Tool Kit and Swage Tool, Flare Tool with Tubing Straightener or Cutter Not a Double Brake Flaring Tool, Shankly Flaring Tool Set 10 Piece #adShankly #ad
- Satisfaction guaranteed: we stand by the word "quality" we assure you that your purchase of this heavy-duty brake line flaring tool or brake tool will arrive in your place in good condition, If any issues occur, feel free to contact us. Multifunctional flare adapters: flaring tool adapters range from the following sizes: 1/8", 5/16", 10mm, 3/8", 7/16", 6mm, 14mm, 8mm, 1/4", making this the only brake line kit a mechanic will need.
Precise and convertible: this brake line flaring tool swivel-type swaging adapters and flaring cones are made of the sturdiest steel materials and chromed finished for easy operation with a self-centering yoke to help form professional flares and swages.
Please note: this is NOT a double flare tool.
All-inclusive kit: shankly’s standard flaring tool kit is all-inclusive, complete with a professional tubing straightener or cutter, allowing the mechanic to focus on the job rather than search for parts. Fits your application: shankly's flaring tool or brake line tool includes five swage fittings and several useful tube sizes: 3/16”, 1/4”, 5/16”, 1/2”, 3/8”, 5/8”, creating a rugged and long lasting brake repair brake flaring tools. Metric: 5mm, 5/8", 3/16", 12mm, 1/2", 16mm.
5. Wostore #ad
Wostore Flaring Tool Kit for Copper Pipe HVAC #adWostore #ad
- Tubing, 1/2”, 5/8”, 5/16”, 1/4”, 3/8”, a rugged and durable flaring tool, swaging tool kit;. Versatile tool kit in a combination tubing flaring and swaging to fit all your needs.
This flaring kit swivel-type swaging adapters and flaring cone are made of the sturdiest steel and chromed for easy operation and precision. Plastic durable case with handle for easy transportation, safe storage and quick organization.
Flaring tool apply to 1/8", 3/8", 3/16", 5/16", 5/8", 1/4", 1/2", 7/16", 3/4" O. D. Tubing. Swage fittings are used to 3/16”, 3/4" o. D. The kit includes 1 flaring cone, 2 flaring bars, 5 swage fittings and 1 storage case.
6. ABN #ad
ABN Bubble Flare Tool & Double Flaring Kit – Tubing Bender Flare Tool & Pipe Cutter 1/8in to 5/8in / 3-16mm #adABN #ad
- Quick & precise cuts: use the included small pipe cutter to cut 1/8-inch to 5/8-inch 3-16mm steel, aluminum, and copper tubing; Pull back the blade and revolve the pipe while compressing; 2 rollers prevent skipping and jumping for most consistent tracking; Cutting wheel life and adjustment amount for each turn of tool is directly proportionate to the hardness of material being cut.
Built to last: swivel constructed from chrome-plated alloy steel to reduce friction; Yoke forged from heat-treated steel for maximum strength and longevity that resists corrosion.
Make double & bubble flares: the abn double flare kit & bubble flaring tool create flares for bending brake and fuel pipes, 10mm steel, 8mm, 5/16", 4.75mm, 6mm, 3/8", gas, water, braking pipe repairs, 4mm, aluminum, 1/2”, and more; fixed head and angles make clean, precise flares; Yoke type compressor with T-bar handle for firm grip; Cone for accurate alignment; For 3/16", 1/4", refrigeration, lines, and copper tubing; Adapters included.
Easy storage: heavy-duty 11. 9” x 2. 8” x 9. 2” inch 302cm x 7. 1cm x 23. 4cm plastic blow-molded carrying case with latches and handle for easy transportation, safe storage, and quick organization; Includes double flaring and bubble flaring instructions for use.
7. Orion Motor Tech #ad
Soft Steel Brake Line & Brass Tubing, Magnesium, Aluminum, Flaring Tool Kit, Single Flaring and Swaging Tool with Extra Adapters, 45° Single Flare on Copper #adOrion Motor Tech #ad
- Do not use for brakes, and refrigeration piping. Tough and handy-built from the toughest steel and chrome plated, 1/4", never-fail tube cutter, 5/16", and a cold storage wrench size: 3/16”, 1/2", 5/8", 3/4" Cast steel Yoke that slides easily on to the sizing bars, your kit includes 5 expansion tube adapters 3/16", 3/8", 5/16”.
Last flaring kit you’ll ever need-we’ve made sure to make this the last flaring tool kit you’ll ever need by including a multitude of accessories, durable ABS plastic storage case, and a plethora of tube sizing options. Total package-this comprehensive 10 pc flaring tool kit comes with every tool a professional mechanic, plumber, not a double flare tool.
Orion has even included an easy to follow step by step guide for even the most inexperienced “Do-It-Yourself’er. You’ll be amazed at just how simple these tools are to use.
Take on any job-6-hole flaring bar comes ready to take on any size job, 1/4", 3/16", 5/16", 6mm, 10mm, 7/16" Metric: 3MM, 8MM, this 1/4 brake line flare in the garage or on at the job site, this will be the last flaring tool you’ll ever need in your arsenal. Please keep in mind, or weekend warrior needs to properly flare any soft metal tubing. Making this the go-to tool kit for all projects requiring flaring. Sizing options include 3/4", 13MM, 1/2", 16MM. The perfect set for widening water, this is a single flare tool, fuel lines, gas, or coolant tubes.
8. LSR LORESO #ad
Brass, LORESO Brake Line Flaring Tool Kit with Swaging Tool Set for 45° Single Flares on Copper, and Soft Steel Lines, Aluminum, Professional Repair and Replacement #adLSR LORESO #ad
- Versatile equipment compatibility – our brake line and swage tool kit can be used in copper, magnesium, aluminum, brass, and soft steel lines to give you more options when repairing lines and working with adapter cones and tubes. Expanded sizes to suit every job – this 45° flaring and swaging kit with cones, bars, tube cutter, fittings, and ratchet wrench features sizes ranging from 1/8” to 5/6” to ¾” and more.
Professional flaring and swaging tool kit – a full-service brake line kit with swage tool and other essential accessories this brake line repair kit ensures you can get the job to standard to ensure safer vehicle operation.
Trusted quality, durability, support, and resilience – here at loreSO we make tools that support rugged jobs and precision craftsmanship which is why every order is backed by our unbeatable customer service, and reliability for quality you can trust.
It even comes with ¾” OD tubing to ensure consistent repairs. Compact, trucks, your home garage, portable storage case – each flaring and swage tool set comes with a heavy-duty storage organizer to make it easier to use in a professional mechanic’s garage, or anywhere you like to work on cars, or SUVs.
9. Hilmor #ad
Pen Style Deburring Tool & Storage Case, Black & Green, FTOK 1937685, Hilmor Orbital Flare Kit with 1⁄8", 1-3⁄8" Tubing Cutter #adHilmor #ad
- No need to worry about cracked tubes during the process. Product dimensions: length: 13", width: 9", Height: 2. 3", weight: 5. 8 lbs. Soft tubing flare kit: For flaring, cutting, steel, and deburring copper, aluminum, brass pipe.
Precision and consistency: Off-center mounted cone spins on an axis to effectively produce quality flares every single time. No cracking tubes: equipped with a clutch mechanism that stops flaring when the job is done.
Dialed-in accuracy: unique, four-roller tracking system keeps tubes from threading allowing you to make the perfect flare each time. Professional: be as preapred as possible as the tool includes a kit box for convenient storage. Deburring tubes and fittings 3/16" to 3/4" just got a lot easier.
|Manufacturer||Newell Brands #ad|
10. OTC #ad
OTC 4504 Stinger ISO Bubble Flaring Tool Kit #adOTC #ad
- Forged yoke is made of heat-treated steel. Flaring bar and all the adapters needed for ISO bubble flaring. Includes four dies 4. 75 6 8 and 10 mm. Housed in a blow-molded storage case. Designed for crack-free bubble flares on soft steel tubing used in automotive brake systems.
|Warranty||One year limited warranty|