As an Amazon Associate I earn from qualifying purchases.
DASBET #ad - Safe: handsfree operation allows you to easily release the retaining circlip; Reduces the risk of damaging the joint, transmission, or other parts; Collar ring opening accommodates axle and allows it to pass through measure your application to ensure exact fitment.
Fits most vehicles: cv joint removal tool, includes 9 holes for full adjustment to fit different length joint assemblies on most cars, fits most vehicles equipped with constant velocity U‑joints.
DPTOOL #ad - Easy to remove cv axle: use this cv joint puller, not need spend a lot of effort, you will pull the old stubborn CV axle and get the new axle installed, without causing damage to expensive aluminum transmission cases or other components. The joint fork could fit on the slide hammer stick, the CV Joint Fork is be threaded internally, have wide use.
Combinnation kit: this kit include: 1 heavy duty slide hammer; 1 opening 63mm cv joint fork; 1 opening 48mm cv joint fork; 1 manual puller; 2pc 16mm nut. This kit have everthing you need to remove cv axle or half shaft, easy to carry, and we offer 12 months warranty, all the tools put in a plastic case, we will refund or replace, if the tool have any quality problem.
5 inches, is twice the average slide hammer, easier to use and work more better, so the generated pulling force is also twice of a normal slide hammer, hammer weight is 10.5 lb, slide hammer and the VC join fork is made of heavy duty steel, durable and not easy to break. Wih 63mm 48mm joint fork: our kit include opening 63mm and 48mm cv joint fork removing adapter, 63mm and 48mm fit most vehicle models, and the Slide Hammer stick is threaded externally. Use our cv joint slide hammer, work more efficiently.
KUNTEC #ad - Cv joint puller reduces the risk of damaging the joint, transmission, or other parts. Cv joint remover is made of high quality galvanized metal iron material, sturdy and durable. 24cm x 14cm overall dimensions with 100mm maximum CV joint diameter.
CATUDIY #ad - All you need to remove CV axle or half shaft are put in this easy-carrying plastic case. Useful cv axle puller: to replace or repair the cv axle joints easily, use this slide hammer kit. Superior material: heat-treated fwd axle puller adapter with black oxide finish is durable and resists rust and corrosion.
Efficient front wheel drive axle puller set: efficient & heavy-duty: our 105 lb curved slide hammers are heavier and larger, and the length of 19. 5 inches ensures sufficient length slide to generate more forceso the generated pulling force is also twice than normal 5lb slide hammer.
Combination kit fits all needs: the cv axle joint pulley removal tool includes a T-style slide hammers, a steel wire joint puller, 2pc 16mm nuts, opening 63mm and 48mm CV joint fork removing attachments. Slide hammer and the vc join fork is made of high quality heavy steel materials with high persistence and durability, not easy to break. Easy to use: attach the cv joint puller to the slide hammer; then slide the cv axle puller adapter around the shaft behind the inner boot; At last use the slide hammer to create added torque to pull out the axle.
CMTOOL #ad - All tools are placed in a plastic case for easy organization and carrying of the product. The joint fork can be installed on the slide hammer rod. Puller for easy removal of cv axleusing the cv joint puller, you can easily pull the old stubborn CV axle and install the new axle without damaging the expensive aluminum transmission cases or other parts.
The kit includes 1 heavy slide hammer; 2 pcs cv joint forks opening 63mm and 48mm; 1 steel wire joint puller; 2 pcs nuts 16 mm. 63mm and 48mm are suitable for most vehicle models and have a wide range of uses. Slide hammer puller set with plastic suitcasethe puller kit contains everything needed to remove the cv axle or half shaft.
Slide hammer made of heavy steelthe slide hammer and the cv joint fork is made of heavy-duty steel, is not easy to break, and the weight is 105 pounds the weight is twice that of ordinary sliding hammers, which can withstand huge pressure without deformation, and is more durable. Slide hammer puller set with 63mm 48mm joint forkopening 63 mm and 48 mm cv joint fork removal adapter. Time-saving and efficient slide hammerthe overall ergonomic design of the slide hammer: the handle is curved, the surface is large, and it is more comfortable to use.
OTC #ad - Joint slide hammer assembly or just the slide hammer extension. This tool pulls constant velocity joints on 1986-current Taurus/Sable.
Generic #ad - Use this universal joint slide hammer to work more efficiently. Remove cv axle easily: using the cv joint puller, you can easily pull the old stubborn CV axle and install the new axle without damaging the expensive aluminum transmission cases and other parts. Packing list: 1 heavy duty slide hammer; 2 pcs cv joint forks opening 63mm and 48mm; 1 manual puller; 2pc 16mm nut.
Part number: SK8038. Heavy steel slide hammer: the slide hammer and the vc join fork is made of heavy duty steel, the length is 19. 5 inches, hammer weight is 105 lb, is twice the average slide hammer, so the generated pulling force is also twice of a normal slide hammer, is not easy to break.
Efficient slide hammer: the overall ergonomic design of the slide hammer, the handle is curved, the surface is large, and it is more comfortable to use. The joint fork could fit on the slide hammer stick, the CV Joint Fork is be threaded internally, 63mm and 48mm are suitable for most vehicle models and have a wide range of uses. Wih 63mm 48mm joint fork: our kit include opening 63mm and 48mm cv joint fork removing adapter, and the Slide Hammer stick is threaded externally.
LUTIFIX #ad - Easy to use--attach the inner cv axle puller to your axle slide hammer then position the adapter around the shaft behind the inner boot; Slide the 10 lb hammer weight back and forth to create torque to pull out the axle; Use lubricant fluid for added ease.
Equipped with 63mm 48mm joint fork kit -- includes opening 63mm and 48mm cv joint fork disassembly adapter, CV joint fork internal thread, and Slide Hammer rod external thread. The joint fork can be installed on the sliding hammer rod, suitable for most models of 63mm and 48mm, and has a wide range of uses.
Perfect design--our slide and the slide hammer follow ergonomic design, which use more comfortable. Use our cv joint slide hammer, the handle is curved and have a large surface, work more efficiently. Built to last--slide hammers are heavier and larger than normal ones, slide hammer and the VC join fork is made of heavy duty steel, have sufficient length slide to generate more force, durable and not easy to break.
FXTUL #ad - Quick to remove cv axle ️ - with this cv axle removal tool the axle assembly is popped out of trans axle, and install the new axle, not need spend a lot of effort. Perfect joint fork ️ - this slide hammer puller set includes opening 63mm and 48mm cv joint fork disassembly adapter, 63mm and 48mm fit most vehicle models, and the Slide Hammer stick is threaded externally.
The joint fork could fit on the slide hammer stick, the CV Joint Fork is be threaded internally, have wide use. So it has enough length to slide to generate more force, durable and not easy to break.
Note: you can use lubricating fluid for added comfort. Easy to use ️ - you need to attach the inner cv axle puller to your axle slide hammer, then place the adapter around the axle after the inner start. Without damage to transmission case or inside roller bearing. Hammer weight back and forth to create torque and pull out the axle. What you get ️ - our slide hammer puller set includes 1* heavy duty slide hammer; 1*opening 63mm cv joint fork; 1*opening 48mm cv joint fork; 1*manual puller; 2pcs* 16mm nut.
1. DASBET
#adDASBET CV Joint Puller Tool 9 Holes Universal Joint Removal Tool CVJ Axle Separator Tool Remover for Repairing
#adFits most vehicles: cv joint removal tool, includes 9 holes for full adjustment to fit different length joint assemblies on most cars, fits most vehicles equipped with constant velocity U‑joints.
More information #ad
Cv joint separator tool: quickly separates the CV Joint from the axle without removing the drive shaft. Built to last: the cv joint puller tool constructed from zinc-plated steel, bar constructed from black-oxide coated steel for maximum strength and longevity that resists rust and corrosion. Size: overall dimension:9. 4"x 5. 75"23. 9cm x 14. 6cm; maximum CV joint diameter: 3. 7"95mm.| Brand | DASBET #ad |
| Manufacturer | DASBET #ad |
| Part Number | DTB608 |
More information #ad
2. DPTOOL
#adInner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit Heavy Duty 10 Pounds Slide Hammer 63mm 48mm CV Joint Fork Adapter Attachments
#adCombinnation kit: this kit include: 1 heavy duty slide hammer; 1 opening 63mm cv joint fork; 1 opening 48mm cv joint fork; 1 manual puller; 2pc 16mm nut. This kit have everthing you need to remove cv axle or half shaft, easy to carry, and we offer 12 months warranty, all the tools put in a plastic case, we will refund or replace, if the tool have any quality problem.
More information #ad
Effient slide hammer: our slide and the slide hammer follow ergonomic design, the handle is curved and have a large surface, which use more comfortable. Heavy duty: our slide hammers are heavier and larger than normal ones, have sufficient length slide to generate more force, length is 19. 5 inches, is twice the average slide hammer, easier to use and work more better, so the generated pulling force is also twice of a normal slide hammer, hammer weight is 10.5 lb, slide hammer and the VC join fork is made of heavy duty steel, durable and not easy to break. Wih 63mm 48mm joint fork: our kit include opening 63mm and 48mm cv joint fork removing adapter, 63mm and 48mm fit most vehicle models, and the Slide Hammer stick is threaded externally. Use our cv joint slide hammer, work more efficiently.
| Brand | DPTOOL #ad |
| Manufacturer | DPTOOL #ad |
| Part Number | H226 |
More information #ad
3. KUNTEC
#adKUNTEC CV Joint Puller Propshaft Separator Tool CVJ CV Axle Removal Tool Universal Joint Removal Tool
#adMore information #ad
Quickly removes the cv joint from the drive shaft without damaging the joint and keeps hands free for releasing retaining circlip. Cv joint removal tool includes 9 holes to allow full adjustment that suits different lengths of joint assemblies on most cars.| Brand | KUNTEC #ad |
| Manufacturer | kuangchen #ad |
| Height | 5 Inches |
| Length | 9 Inches |
| Width | 3 Inches |
| Part Number | KC0029 |
More information #ad
4. CATUDIY
#ad10lb Heavy Duty Inner CV Axle Removal Tool for FWD Vehicles Front Wheel Drive Axle Half Shaft Removal Tool,CATUDIY Inner CV Joint Puller Tool & Slide Hammer Puller Set with 48&63MM Joint Fork Adapters
#adEfficient front wheel drive axle puller set: efficient & heavy-duty: our 105 lb curved slide hammers are heavier and larger, and the length of 19. 5 inches ensures sufficient length slide to generate more forceso the generated pulling force is also twice than normal 5lb slide hammer.
More information #ad
Fit most vehicles like Compatible for Ford Taurus/Sable 1986-2021. Save efforts and works more efficiently. The cv joint puller adapter and large slide hammer bearing puller allow to create added torque to loosen and remove stubborn axle shafts and water pumps, without damaging to transmission cases or other components. Combination kit fits all needs: the cv axle joint pulley removal tool includes a T-style slide hammers, a steel wire joint puller, 2pc 16mm nuts, opening 63mm and 48mm CV joint fork removing attachments. Slide hammer and the vc join fork is made of high quality heavy steel materials with high persistence and durability, not easy to break. Easy to use: attach the cv joint puller to the slide hammer; then slide the cv axle puller adapter around the shaft behind the inner boot; At last use the slide hammer to create added torque to pull out the axle.
| Brand | CATUDIY #ad |
| Manufacturer | CATUDIY #ad |
| Part Number | CBHD01 |
More information #ad
5. CMTOOL
#adFront Wheel Drive Axle Puller Set Half Shaft Removal Tool, 10.5 Pounds Heavy Duty Slide Hammer, CV Joint Puller Adapter 63mm 48mm Joint Fork, CMTOOL Inner CV Joint Removal Tool Kit
#adThe kit includes 1 heavy slide hammer; 2 pcs cv joint forks opening 63mm and 48mm; 1 steel wire joint puller; 2 pcs nuts 16 mm. 63mm and 48mm are suitable for most vehicle models and have a wide range of uses. Slide hammer puller set with plastic suitcasethe puller kit contains everything needed to remove the cv axle or half shaft.
More information #ad
The surface has also undergone a special anti-rust treatment. Use this universal joint slide hammer to work more efficiently. The sliding distance is 19. 5 inches, so it can generate greater pulling force and work easier. Slide hammer made of heavy steelthe slide hammer and the cv joint fork is made of heavy-duty steel, is not easy to break, and the weight is 105 pounds the weight is twice that of ordinary sliding hammers, which can withstand huge pressure without deformation, and is more durable. Slide hammer puller set with 63mm 48mm joint forkopening 63 mm and 48 mm cv joint fork removal adapter. Time-saving and efficient slide hammerthe overall ergonomic design of the slide hammer: the handle is curved, the surface is large, and it is more comfortable to use.
| Brand | CMTOOL #ad |
| Manufacturer | CMTOOL #ad |
| Part Number | AL-12 |
More information #ad
6. CTA Tools
#adCTA Tools 4245 CV Joint Puller
#adCTA Tools #ad - Pulls cv joints with Hidden Retaining Rings. Whether tuning up your ‘68 corvette or changing the Oil on a John Deere Tractor, CTA Can Supply You with the Tools Needed to do the Job.More information #ad
Heavy-duty construction Allows for Strength and Durability. Use with cta tools 4310 Axle Puller. Prevents damage to the Roller Bearing Inside the Joint.| Brand | CTA Tools #ad |
| Manufacturer | CTA Tools #ad |
| Height | 2 Inches |
| Length | 8.25 Inches |
| Weight | 1 Pounds |
| Width | 5.5 Inches |
| Part Number | 4245 |
| Model | 4245 |
More information #ad
7. OTC
#adWhite, OTC 7509 Inner CV Joint Puller
#adMore information #ad
With this puller, the axle assembly is popped out of the transaxle without damage, thanks to the straight, even pull provided by the slide hammer. Tool is available with fork only, C. V.| Brand | OTC #ad |
| Manufacturer | OTC #ad |
| Height | 3.4 Inches |
| Length | 4.2 Inches |
| Weight | 8.1 Pounds |
| Width | 25 Inches |
| Part Number | 7509 |
| Model | 7509 |
| Warranty | LIFETIME |
More information #ad
8. Generic
#ad10 Pounds Heavy Duty Slide Hammer Front Wheel Drive Axle Half Shaft Removal Puller Tool Set, Inner CV Joint Removal Tool Kit, 63mm 48mm CV Joint Fork Adapter
#adPart number: SK8038. Heavy steel slide hammer: the slide hammer and the vc join fork is made of heavy duty steel, the length is 19. 5 inches, hammer weight is 105 lb, is twice the average slide hammer, so the generated pulling force is also twice of a normal slide hammer, is not easy to break.
More information #ad
All tools are placed in a plastic case for easy organization and carrying. Slide hammers are heavier and larger than normal ones, which can withstand huge pressure without deformation, so it can generate greater pulling force and work easier. Efficient slide hammer: the overall ergonomic design of the slide hammer, the handle is curved, the surface is large, and it is more comfortable to use. The joint fork could fit on the slide hammer stick, the CV Joint Fork is be threaded internally, 63mm and 48mm are suitable for most vehicle models and have a wide range of uses. Wih 63mm 48mm joint fork: our kit include opening 63mm and 48mm cv joint fork removing adapter, and the Slide Hammer stick is threaded externally.
| Brand | Generic #ad |
| Manufacturer | Generic #ad |
| Part Number | SK8038 |
More information #ad
9. LUTIFIX
#adInner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit CV Joint Puller Adapter 63mm 48mm CV Joint Fork Adapter Attachments
#adEquipped with 63mm 48mm joint fork kit -- includes opening 63mm and 48mm cv joint fork disassembly adapter, CV joint fork internal thread, and Slide Hammer rod external thread. The joint fork can be installed on the sliding hammer rod, suitable for most models of 63mm and 48mm, and has a wide range of uses.
More information #ad
Remove front wheel drive axles easily--use this cv joint puller, not need spend a lot of effort, You will pull the old stubborn CV axle and get the new axle installed, without causing damage to expensive aluminum transmission cases or other components. Perfect design--our slide and the slide hammer follow ergonomic design, which use more comfortable. Use our cv joint slide hammer, the handle is curved and have a large surface, work more efficiently. Built to last--slide hammers are heavier and larger than normal ones, slide hammer and the VC join fork is made of heavy duty steel, have sufficient length slide to generate more force, durable and not easy to break.
| Brand | LUTIFIX #ad |
| Manufacturer | LUTIFIX #ad |
| Part Number | LUTIFIX |
| Model | LUTIFIX |
More information #ad
10. FXTUL
#adInner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit CV Axle Removal Tool Slide Hammer 63mm 48mm CV Joint Fork Adapter Attachments
#adThe joint fork could fit on the slide hammer stick, the CV Joint Fork is be threaded internally, have wide use. So it has enough length to slide to generate more force, durable and not easy to break.
More information #ad
Heavy duty ️ -this slide hammer weighs 105 pounds and is 19. 5 inches long, easier to use and work better. The hammer and vc joint fork are made of heavy-duty steel, which is larger than the normal ones. Note: you can use lubricating fluid for added comfort. Easy to use ️ - you need to attach the inner cv axle puller to your axle slide hammer, then place the adapter around the axle after the inner start. Without damage to transmission case or inside roller bearing. Hammer weight back and forth to create torque and pull out the axle. What you get ️ - our slide hammer puller set includes 1* heavy duty slide hammer; 1*opening 63mm cv joint fork; 1*opening 48mm cv joint fork; 1*manual puller; 2pcs* 16mm nut.
| Brand | FXTUL #ad |
| Manufacturer | FXTUL #ad |
| Part Number | MMZ-430 |
More information #ad
