As an Amazon Associate I earn from qualifying purchases.
SpeTool #ad - Solid carbide spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length. The spiral bit used for smoothly downcut upcut groove and slots, Plunge cut leave with clean edge, Cycles and dados, Mortises, better than straight bits.
RoutyBits #ad - For wood, mdf, laminate, Plywood, Plastic. For both cNC and handheld routers. Long-lasting edge sharpness. Fits makita, bosch, and any Brand Plunge Router with 1/4" Collet. Industry-grade durability.
SpeTool #ad - The carbide end mill suit for cnc router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet. The carving bits kits of Tapered Ball Nose, Spiral, Cone End Mill Cutter. Include 3*carbide end mills 2 pc v-groove end mill, 1 pc down cut, 1pcs tapered end mill, 4*Spiral End Mill 3 pc up cut, 1*ball end mill.
Freud #ad - Standard uncoated bits. Coating for cool cutting edge and superior chip evacuation. Freud tico hi-density Carbide = 2X increased life and performance vs. Specifically designed for CNC Makers to deliver long cutting life, maximum durability and high quality finish.
AnoleX #ad - Spiral router bitsthis ultra-fine carbide milling cutter set has high hardness, high speed cutting and bending strength, wear resistance, high strength, and a smooth finish.
Ticn coatinghigh hardness, high reliability in dry operations, Good abrasive wear resistance, Lubricants can be reduced or replaced, good corrosion resistance, Low residual stress, Performs under conditions of high load, Excellent chemical resistance.
YOKISHUN #ad - Br>used for: plastics, plywood, wood, MDF and other wood composites etc. Br>nano blue coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity.
Sinoprotools #ad - 1/4 router bit set: size: 1/4 inch shank, Let you enjoy DIY. Wood router bits:these cnc bits are suitable for engraving soft and hard wood, plywood, MDF and more. Cnc router bits-4 pieces:the carving router bit sets of Tapered Ball Nose, Spiral, Cone End Mill Cutter.
MUMUWMX #ad - Cutting edge diameter, 1/2"12mm. Perfect cutting -- cnc router bits design of 2 flutes, larger spiral chip space of CNC Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal.
Overall length, 1/8" 3. 175mm. Suitable machining material --spiral upcut router bit for MDF, resin, nylon, plywood, density board, ABS, acrylic, PVC, wood, plastics, hardwood etc. Cutting edge length/flute length, 1-1/2"38.
Genmitsu #ad - Applicable materials: suitable for such as pcb, plywood, abs, plastic fiber, Mold, resin, acrylic, nylon, cnc, PVC, printed circuit board, carbon fiber, density board, MDF, SMT, hardwood, and other precision parts processing and milling.
High quality: made of tungsten carbide steel alloy, which is high wear resistance and anti-impairment. Wide compatibility: the mc30a end mills are compatible with most desktop cnc machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines.
O flute & 2-flute ball nose end mill -- shank diameter: 3. 175mm, cutting Diameter: 3. 175mm, cutting length: 17mm, Overall Length: 38mm. Corn-shaped end mill set -- shank diameter: 3. 175mm, cutting length: 8mm, Cutting Diameter: 08mm, overall Length: 38mm. Moreover, its nano blue coating / Titanium Coating with high hardness and heat resistance provides longevity and produces cutting results of the highest quality.
SpeTool #ad - 5 pcs bit. 1/4 inch shank. Spiral router bit. Multi bit. This "v" grooving bits are designed to cut deep or shallow 60 & 90 degree "V" grooves.
This packge include 5 pcs router bit; 2 pcs v-groove and 3 pcs spiral router bit. This set include 60, 90 degree v-bit, 1/4 extra long up cut, 1/8 inch up cut, 1/4 down cut router bit.
1. SpeTool
#adSpeTool 5PCS Spiral Router Bits Up Down Compression Bit with 1/4" Shank 1" Cutting Length, Solid Carbide CNC Router Bit Set for Wood Slot Mortise Cut Carving Engraving
#adMore information #ad
The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. The 5pcs cnc router bit set include 2pcs upcut, 2PCS Downcut, 1PC Compression Bit. The cnc end mill for plywood, oAK, mdf, and any hardwood working and Long service life for sharp.| Brand | SpeTool #ad |
| Manufacturer | SpeTool #ad |
| Height | 0.25 inches |
| Length | 2.5 inches |
| Width | 0.25 inches |
| Part Number | WD-4 |
More information #ad
2. RoutyBits
#ad.015 .031 .063 Radius 3D Carving Bit Set, 1/4 Inch Shank, CNC Router Bits, Solid Carbide Bit, 3 Pack, Tapered Ball Nose, ROUTYBITS
#adMore information #ad
| Brand | RoutyBits #ad |
| Manufacturer | RoutyBits #ad |
| Part Number | RB117 |
More information #ad
3. SpeTool
#adSpeTool CNC Router Bits Carving 8 Pcs Set for Wood Detail Profile V Groove Engraving Solid Carbide 1/4 Inch Shank
#adMore information #ad
For cnc, stainless steel, MDF, plastics, acrylic, Engraving machine. Carving wood, plywood, titanium alloy etc. Long service life, Decreasing the times of changing cutters, Saving production time.| Brand | SpeTool #ad |
| Manufacturer | SpeTool #ad |
| Part Number | WD-2 |
| Model | WD-1 |
More information #ad
4. Freud
#adFreud 87-208: 8 Piece CNC Router Bit General Purpose Set
#adMore information #ad
Black i. C. E. 1/4". Black i. C. E. Freud premier Solid Carbide. Specs: shank Dia. Enhanced tico super density Carbide with chromium designed and manufactured by Freud for 2x cutting life. Advanced cutting geometry for superior chip evacuation and finish quality.| Brand | Freud #ad |
| Manufacturer | Freud #ad |
| Height | 1 Inches |
| Length | 1 Inches |
| Weight | 0.76 Pounds |
| Width | 1 Inches |
| Part Number | 87-208 |
| Model | 87-208 |
More information #ad
5. AnoleX
#ad10Pcs TiCN Coated CNC Router Bit Set, 1/8” Shank End Mill Cutter Carbide for Engraving Rotary Tool
#adTicn coatinghigh hardness, high reliability in dry operations, Good abrasive wear resistance, Lubricants can be reduced or replaced, good corrosion resistance, Low residual stress, Performs under conditions of high load, Excellent chemical resistance.
More information #ad
Materialhra94 tungsten carbide has excellent properties such as high hardness, good strength and toughness, heat resistance and corrosion resistance, wear resistance, especially its high hardness and wear resistance. Overall Length: 38mm. 1/8” shank10 different cutting diameter: 08-3. 0mm 08/1. 0/1. 2/1. 4/1. 6/1. 8/2. 0/2.| Brand | AnoleX #ad |
| Manufacturer | AnoleX #ad |
| Part Number | GTYM83175 |
More information #ad
6. YOKISHUN
#adYOKISHUN CNC Router bits Carbide Ball Nose End Mill with Nano Blue Coating 1/4inch Shank for Side Milling,End Milling,Finish Machining 1/4"x1/4"x2-1/2"
#adMore information #ad
Br>high precision finish by cNC machine, For smooth contour 3D CNC milling and carving. Br>cutting length 1" Overall Length:2-1/2". This provides longevity and produces cutting results of the highest quality. Br>shank diameter:1/4" Cutting Diameter 1/4".| Brand | YOKISHUN #ad |
| Manufacturer | YOKISHUN #ad |
| Height | 0.2 inches |
| Length | 2.5 inches |
| Width | 0.2 inches |
| Part Number | 006 |
More information #ad
7. Sinoprotools
#adCNC Wood Router Bits, CNC Router Kit End Mills,V Groove Engraving Router Bit, Cabinet Making Tools-4 Pcs, Sinoprotools 1/4 Shank CNC Router Bits Carving Set
#adMore information #ad
High-quality material: the router bit set is made of super hard alloy，Long service life, Decreasing the times of changing cutters, Saving production time. Applicable machines:cnc router, xcarve and Makita, bosch, and Any Brand Plunge Router with 1/4" Colle.| Brand | Sinoprotools #ad |
| Manufacturer | Sinoprotools #ad |
| Part Number | LIXIDAO03 |
More information #ad
8. MUMUWMX
#adCNC Carbide End Mills 1/8" Router Bits Sprial CNC Router Bits Two Flute 3.175mm Spiral Upcut Milling Cutter for Wood PVC MDF Hardwood 10pcs 3.175x22x38mm
#adOverall length, 1/8" 3. 175mm. Suitable machining material --spiral upcut router bit for MDF, resin, nylon, plywood, density board, ABS, acrylic, PVC, wood, plastics, hardwood etc. Cutting edge length/flute length, 1-1/2"38.
More information #ad
5mm. High efficiency --spiral router bit own sharp edge which is able for fast engraving that makes high efficiency; durable, high precision and not easy to break; it is smokeless and burr-free while processing. Used for -- cnc router bits used for surface machining, engraving, milling, slotting, 3D relief sculpturing, cutting, carving etc. Dimensions: 1/8" 3. 175mm.| Brand | MUMUWMX #ad |
| Manufacturer | MUMUWMX #ad |
| Part Number | MUMUSR3.175-10PCSXG |
More information #ad
9. Genmitsu
#adMC30A, 1/8'' Shank Carbide Milling Cutter Bit Set Including Spiral Upcut O Flute Titanium Coat End Mill, 2-Flute Ball Nose End Mill & Corn-shaped Nano Blue Coat CNC Bits, Genmitsu 30pcs End Mills CNC Router Bits
#adHigh quality: made of tungsten carbide steel alloy, which is high wear resistance and anti-impairment. Wide compatibility: the mc30a end mills are compatible with most desktop cnc machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines.
More information #ad
To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart CNC Bits Buying Guide at the Product Guides and Documents Section below. O flute & 2-flute ball nose end mill -- shank diameter: 3. 175mm, cutting Diameter: 3. 175mm, cutting length: 17mm, Overall Length: 38mm. Corn-shaped end mill set -- shank diameter: 3. 175mm, cutting length: 8mm, Cutting Diameter: 08mm, overall Length: 38mm. Moreover, its nano blue coating / Titanium Coating with high hardness and heat resistance provides longevity and produces cutting results of the highest quality.
| Brand | Genmitsu #ad |
| Manufacturer | Genmitsu #ad |
| Part Number | 101-61S-MC30A |
More information #ad
10. SpeTool
#adSpeTool 5 Pcs CNC Router Bits Set Sign Carving Up Down Extra Long Cut for Wood Profile V Groove Engrave with 1/4 Inch Shank
#adThis packge include 5 pcs router bit; 2 pcs v-groove and 3 pcs spiral router bit. This set include 60, 90 degree v-bit, 1/4 extra long up cut, 1/8 inch up cut, 1/4 down cut router bit.
More information #ad
Used for making signs or adding decorative accents to furniture and plaques. V-groove bit. Used for smoothly downcut groove and slots, Cycles and dados leave with clean edge and top surface, Mortises, better than straight bits. The bit with 1/4" shank can fit any brand plunge router with 1/4” collet.| Brand | SpeTool #ad |
| Manufacturer | SpeTool #ad |
| Part Number | WD-3 |
More information #ad
