As an Amazon Associate I earn from qualifying purchases.
Ade model rd3-006, rd3-012, burris fastfire, rd3-009, meopta, rd3-015 are designed to fit the slide/footprint of plate made for Vortex Venom, Docter, Insight, RD3-013, Eotech MRDS.
It is also compatible to optics Ready pistols such as Glock MOS, Springfield OSP,. This green dot comes with a picatinny mounting base. Designed in Oregon. Powered by a lithium CR2032 batteryIncluded. Multi Illumination Settings. We have made several improvements since it's initial release in 2016. Any plate made for those brands also fits this sight.

Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Designed in Oregon. We have made it more durable to withstand recoil and improved the ability to hold zero.
Powered by a lithium CR2032 batteryIncluded. This red dot comes with a picatinny mounting base. Waterproof/shock/fog resistant. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to optics Ready pistols such as Glock MOS, Springfield OSP,. 5 illumination Settings. Any plate made for those brands also fits this sight.

Any plate made for those brands also fits this sight. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Comes with an removable picatinny mounting base to attach to any thing with piatinny rail.
Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. However the front switch of the sight needs to trim down 2mm depends on exact pistol model if the pistol's pre-cut is very short. Multi Illumination Settings. This huracan green dot sight fits directly to optics ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP.

1. 75" length x1. 25" width x1. 15" height. Additional mounting plates for hunguns sells separately. The red dot is compatible with ade handgun mounts for glock barreta hk ups SW MP SIG P226 Springfield Ruger LC9 LC9s LC380 SR9 SR22 SR40 SR45.

Since it has a motion sensor to go to sleep, the motion sensor is turned off too.
Comes with a picatinny mounting plate and a pair of screws. Weight 1. 06 oz. You hold + and - for 2 sec to turn on, users do not really need to power it off. Shockproof/Fogproof/RainProof. When the unit is powered off, and hold both + and - to turn off.

1. 75" length x1. 25" width x1. 15" height. Multi Illumination Settings. With motion activated system, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, while the Ares Pro is turned on, it instantly switches on illumination at the previous brightness setting.
Powered by a lithium CR2032. Ade rd3-020 raptor, rd3-023 valkyrie, rd3-019 stingray fit optic cut/optic plate/ that is compatible with Trijicon RMR/SRO/Holosun 407C/507C footprint. The removeable weather shield protects the sight from moisture and provides a clearer sight picture during inclement weather. Ade rd3-018 spike, rd3-021 nuwa fit optic cut/optic plate that is compatible with shield RMS/RMSC/Deltapoint Pro footprint.

The lens is coated with multi-coating to eliminate glare and provide a high level of performance in low light. Better yet, a 2 moa dot only, so no re-zeroing is necessary. The additional features that the pRO series includes are Motion Activated System, IP67 Waterproof, and Multi Reticle Technology.
While delta pro is turned on, but when any motion or vibration is detected, the red dot illumination goes to sleep after five minutes of inactivity, it instantly switches on illumination at the previous brightness setting.1. 75" length x1. 25" width x1. 15" height. Does not fit optic plate/cut for rmR, tool, cover, removeable picatinny plate with two screws, Shield RMS type footprints.

Any plate made for those brands also fits this sight. Rd3-011 only Fits Trijicon ftprt. Powered by a lithium CR2032 batteryIncluded. It is also compatible with varies handgun mounting plates that replace rear sight dovetail.
Multi Illumination Settings. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture. This green dot comes with a picatinny mounting base. We have made it more durable to withstand recoil and improved the ability to hold zero. It is fits directly to "optics ready" pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. Designed in Oregon.

0 optics ready, tp9 sft, ruger max-9, girsan mc1911sc ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint.2
For the rear of part of the red dot to become a back up iron sight. Ade makes the red dot to accept the industrial standard footprint. For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness. Ade does not know the screw spec every pistol manufacture used for their screw hole.

With the ultra short design, to give enough distance to be a Co-Witness back up sight, the red dot provides a distance/gap on some full size optics ready pistols, in addition to the LED dot and pistol equipped iron sight.
The brightness will turn high and low accordingly to the environment brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. 4moa, weight approximately 17. 6 grames062oz, Length1. 6" x Width. 92" x Height.
1. Ade Advanced Optics
#ad
Ade Advanced Optics RD3-006B Green Dot Micro Mini Reflex Sight For Handgun
#adAde Advanced Optics #ad - We have made it more durable to withstand recoil and improved the ability to hold zero. 3 moa. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.Ade model rd3-006, rd3-012, burris fastfire, rd3-009, meopta, rd3-015 are designed to fit the slide/footprint of plate made for Vortex Venom, Docter, Insight, RD3-013, Eotech MRDS.
More information #ad
It is also compatible with varies handgun mounting plates that replace rear sight dovetail. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. It is also compatible to optics Ready pistols such as Glock MOS, Springfield OSP,. This green dot comes with a picatinny mounting base. Designed in Oregon. Powered by a lithium CR2032 batteryIncluded. Multi Illumination Settings. We have made several improvements since it's initial release in 2016. Any plate made for those brands also fits this sight.
Brand | Ade Advanced Optics #ad |
Manufacturer | Ade Advanced Optics #ad |
Weight | 0.4 Pounds |
Part Number | RD3-006B |
Model | RD3-006B |
More information #ad
2. Ade Advanced Optics
#ad
Ade Advanced Optics RD3-009-2 Red Dot Sights
#adAde Advanced Optics #ad - 5 moa. We have made several improvements since it's initial release in 2014. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Designed in Oregon. We have made it more durable to withstand recoil and improved the ability to hold zero.
More information #ad
Ade model rd3-006, docter, rd3-009, rd3-012, insight, rd3-013, meopta, burris fastfire, rd3-015 are designed to fit the slide/footprint of plate made for Vortex Venom, Eotech MRDS. Powered by a lithium CR2032 batteryIncluded. This red dot comes with a picatinny mounting base. Waterproof/shock/fog resistant. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to optics Ready pistols such as Glock MOS, Springfield OSP,. 5 illumination Settings. Any plate made for those brands also fits this sight.
Brand | Ade Advanced Optics #ad |
Manufacturer | Ade Advanced Optics #ad |
Part Number | RD3-009-2 |
Model | RD3-009-2 |
More information #ad
3. Ade Advanced Optics
#ad
Ade Advanced Optics RD3-006A Green Dot Micro Mini Reflex Sight for Handgun
#adAde Advanced Optics #ad - It also fits canik using Canik provided mount marked for Doctor/Venom type red dot. Ade rd3 006, meopta, rd3 009, rd3 012, docter, rd3 013, burris fastfire, insight, rd3 015 are designed to fit the slide/footprint of plate made for Vortex Venom, Eotech MRDS.Any plate made for those brands also fits this sight. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Comes with an removable picatinny mounting base to attach to any thing with piatinny rail.
More information #ad
Powered by a lithium CR2032 battery. Powered by a lithium CR2032 batteryIncluded. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. However the front switch of the sight needs to trim down 2mm depends on exact pistol model if the pistol's pre-cut is very short. Multi Illumination Settings. This huracan green dot sight fits directly to optics ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP.
Brand | Ade Advanced Optics #ad |
Manufacturer | Ade Advanced Optics #ad |
Weight | 0.4 Pounds |
Part Number | rd3-006A |
Model | rd3-006A |
More information #ad
4. Ade Advanced Optics
#ad
Ade Advanced Optics rd3-012 6MOA Red Dot Micro Mini Reflex Sight for Handgun
#adAde Advanced Optics #ad - Shockproof, fogproof and waterproof for 30 minutes under 4ft water. Feature 1 M. O. A wind age and elevation adjustments with audible click. Every time you turn on the dot it stays the same brightness level last time it was turned off.1. 75" length x1. 25" width x1. 15" height. Additional mounting plates for hunguns sells separately. The red dot is compatible with ade handgun mounts for glock barreta hk ups SW MP SIG P226 Springfield Ruger LC9 LC9s LC380 SR9 SR22 SR40 SR45.
More information #ad
6 moa dot. Promotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast. Come with protected cover, Adjustment wrench, adjustment dailing plate, User Manual and Picatinny mounting plate. Red dot has multi brightness level with one adjustment button. Top load system, no need to Remove the sight to change the Battery.Brand | Ade Advanced Optics #ad |
Manufacturer | Ade Advanced Optics #ad |
Part Number | rd3-012 |
Model | rd3-012 |
More information #ad
5. Ade Advanced Optics
#ad
6MOA…, Ade Advanced Optics RD3-020 Raptor Red Dot Sight for RMR Footprint/Mounting Plate/Slide/Plate Optics Ready Pistol
#adAde Advanced Optics #ad - The raptor has motion-on/wake-sleep technology. Dimension 1. 47x1x1. 1 inches. Operates with a single cr2032 batteryincluded. 2 moa red dot. While raptor is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting.Since it has a motion sensor to go to sleep, the motion sensor is turned off too.
More information #ad
This red dot does noT comes with any other optic plate to mount on an specific pistol. Battery life is up to 50000 on low and 500 on brightest setting. 1-10 levels of brightness intensity. Ade rd3-020 rapter is a 2 moa red dot designed to fit any pistol mounting plate/slide/cut that is compatible with RMR/SRO, Holosun 407C/507C/508T footprint red dots. Comes with a picatinny mounting plate and a pair of screws. Weight 1. 06 oz. You hold + and - for 2 sec to turn on, users do not really need to power it off. Shockproof/Fogproof/RainProof. When the unit is powered off, and hold both + and - to turn off.
Brand | Ade Advanced Optics #ad |
Manufacturer | Ade Advanced Optics #ad |
Weight | 0.07 Pounds |
Part Number | 020-Rapter |
More information #ad
6. Ade Advanced Optics
#ad
Ade Advanced Optics ARES RD3-028 PRO Motion Activated 3.5MOA Red Dot Mini Reflex Sight with Weather Shield for Handgun
#adAde Advanced Optics #ad - Ade rd3-006, rd3-012, rd3-009, rd3-013 fit optic cut/optic plate that is compatible with Doctor/Vortex Venom/Viper/Burris Fastfire footprint. User also has the option to manually turn the red dot power off to disable the Motion Activated System. Once installed the weather shield will protect from rain or snow and will stay attached even when mounted on a handgun.1. 75" length x1. 25" width x1. 15" height. Multi Illumination Settings. With motion activated system, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, while the Ares Pro is turned on, it instantly switches on illumination at the previous brightness setting.
More information #ad
Ade is releasing the 2023 pro series that are sensor activated/awake for ade rd3 series fits a varieties of popular footprint on the market. Powered by a lithium CR2032. Ade rd3-020 raptor, rd3-023 valkyrie, rd3-019 stingray fit optic cut/optic plate/ that is compatible with Trijicon RMR/SRO/Holosun 407C/507C footprint. The removeable weather shield protects the sight from moisture and provides a clearer sight picture during inclement weather. Ade rd3-018 spike, rd3-021 nuwa fit optic cut/optic plate that is compatible with shield RMS/RMSC/Deltapoint Pro footprint.
Brand | Ade Advanced Optics #ad |
Manufacturer | Ade Advanced Optics #ad |
Part Number | RD3-028 |
Model | RD3-028 |
More information #ad
7. Ade Advanced Optics
#ad
ADE 2023 RD3-012-PRO Series Motion Activated Red Dot Sight with Multi Reticle System for Optics Ready Pistol Slide/Cut That is Compatible with Doctor Footprint
#adAde Advanced Optics #ad - Ade is releasing the 2023 pro series for ade rd3-0122016-present delta red dot called delta prod3-012PRO. Press and hold the UP switch for 3 seconds to change reticle. Press and hold the dowN switch for 3 seconds to manually turn on/off the power.The lens is coated with multi-coating to eliminate glare and provide a high level of performance in low light. Better yet, a 2 moa dot only, so no re-zeroing is necessary. The additional features that the pRO series includes are Motion Activated System, IP67 Waterproof, and Multi Reticle Technology.
More information #ad
Top load system, no need to remove the sight to change the battery. The ade delta prod3-012pro has motion activated system. While delta pro is turned on, but when any motion or vibration is detected, the red dot illumination goes to sleep after five minutes of inactivity, it instantly switches on illumination at the previous brightness setting.1. 75" length x1. 25" width x1. 15" height. Does not fit optic plate/cut for rmR, tool, cover, removeable picatinny plate with two screws, Shield RMS type footprints.
Brand | Ade Advanced Optics #ad |
Manufacturer | Ade Advanced Optics #ad |
Part Number | RD3-012-PRO-1 |
Model | RD3-012PRO-RED |
More information #ad
8. Ade Advanced Optics
#ad
Ade Advanced Optics Huracan Green Dot Micro Mini Reflex Sight for Handgun
#adAde Advanced Optics #ad - Other handgun mounting plates are not included. We have made several improvements since it's initial release in 2016. Ade rd3-006, rd3-013, insight, rd3-009, rd3-012, rd3-015 are designed to fit the slide/footprint of plate made for Vortex Venom, Docter, burris fastfire, Meopta, Eotech MRDS.Any plate made for those brands also fits this sight. Rd3-011 only Fits Trijicon ftprt. Powered by a lithium CR2032 batteryIncluded. It is also compatible with varies handgun mounting plates that replace rear sight dovetail.
More information #ad
3 moa. It also fits canik using canik provided #1 mount, however the front switch of the sight needs to trim down 2mm. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Multi Illumination Settings. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture. This green dot comes with a picatinny mounting base. We have made it more durable to withstand recoil and improved the ability to hold zero. It is fits directly to "optics ready" pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. Designed in Oregon.
Brand | Ade Advanced Optics #ad |
Manufacturer | Ade Advanced Optics #ad |
Weight | 0.4 Pounds |
Part Number | rd3-006A-HURACAN |
Model | rd3-006A-HURACAN |
More information #ad
9. Ade Advanced Optics
#ad
Ade NUWA 2MOA Micro Red Dot for RMS/RMSC Footprint Optics Ready Pistol Such as Canik TP9 Elite SC, Springfield Hellcat OSP/PRO, Sig Sauer P365XL/P365X,Ruger Max-9,Glock 43 MOS, Mete SFT
#adAde Advanced Optics #ad - Comes with 3 pairs of screws for sig p365xl/x, springfield hellcat osp and canik tp9 elite sc only. Designed to fit canik elite tp9 sc, s&p shield plus performance center, canik mete sft, glock 43x mos/48 mosnot compatible with regular glock 43x/48 that are not moS, tp9 sc, Mossberg MC2SC, S&w m&W MP9 EZ, walther pps m2 optics ready, Springfield Hellcat OSP, sig p365xl/p365x, s&W Shield 2.0 optics ready, tp9 sft, ruger max-9, girsan mc1911sc ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint.2
More information #ad
2moa red dot. Weight approximately 15. 5 grames055oz, Length1. 5" x Width. 88" x Height. 89". Battery life approximately 500-800 depends on the brightness setting. If you can’t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size. For the rear of part of the red dot to become a back up iron sight. Ade makes the red dot to accept the industrial standard footprint. For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness. Ade does not know the screw spec every pistol manufacture used for their screw hole.
Brand | Ade Advanced Optics #ad |
Manufacturer | Ade Advanced Optics #ad |
Weight | 0.03 Pounds |
Part Number | RD3-021-2 |
More information #ad
10. Ade Advanced Optics
#ad
P365XL Spectre Comp and Canik TP9 Elite SC, Ade Advanced Optics RD3-018-SC Spike Micro Red Dot Sight for Springfield Hellcat OSP/PRO
#adAde Advanced Optics #ad - The provided screws might NOT work with EVERY compatible pistol listed. Comes with 3 pairs of screws for sig p365xl/x, springfield hellcat osp and canik tp9 elite sc only. Ade spike created an iron sight curve at the end of the body, and also added two white dots on the curve.With the ultra short design, to give enough distance to be a Co-Witness back up sight, the red dot provides a distance/gap on some full size optics ready pistols, in addition to the LED dot and pistol equipped iron sight.
More information #ad
The pistol manufacturer makes the optic cut/slide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take. The brightness will turn high and low accordingly to the environment brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. 4moa, weight approximately 17. 6 grames062oz, Length1. 6" x Width. 92" x Height.
Brand | Ade Advanced Optics #ad |
Manufacturer | Ade Advanced Optics #ad |
Weight | 0.04 Pounds |
Part Number | SPIKE-SC |
More information #ad