As an Amazon Associate I earn from qualifying purchases.
DNA MOTORING #ad - Enhance performencedyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency.
Muffler & diameter2. 5" od inlet / 2. 5" od main piping ; Dual 3. 5" od muffler Tips. Quality constructionmade of high quality t-304 stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
Muffler tip type: burnt tip | muffler Exhaust Tip Diameter: 4" | Inlet Size: 2. 25". No drilling or modifications needed for installation. Gaskets and hardware are Included.
SPEC-D TUNING #ad - All of our items are 100% in original packaging! you will never receive a used item from us! items are exactly the same as shown in the images! you will receive the Exact Item You Purchased! Installation made easy on All of Our Items! Little to No Modifications needed at Best! 30 days refund & 90 days defective item replacement Warranty! Any Issues With Your Item Please Call/Email Us and We Will Help You! Fitment: compatible with acura integra 2DR Hatchback 1994-2001 models only Non GSR models.
DNA MOTORING #ad - Tig welded cnc machine flange for resistance against pressure and corrosion. Quality constructionmade of high quality t-304 stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
Designthe larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound.
Yonaka Motorsports #ad - 3" mandrel bent piping. Clean, deep hum, without the irritating mid range raspy sound. 4" stainless steel exhaust tip. Fully polished stainless steel. Direct bolt on fit to OEM, all installation hardware included, sound clip video available upon request.
Walker's #ad - Easier to install -- featuring slotted bolt holes where applicable for easy installation, gasket slips into place. Available in different sizes -- offered in a variety of styles and sizesfora quality vehicle repair.
Inside diameter - 2 inches, outside diameter -2. 5 inches. Heat resistant -- designed to resist heat for long-lasting performance. Engineering expertise -- parts are reviewed and validated and approved by Walker engineers through rigorous research and development.
1. DNA MOTORING
#adDo Not Fit GS-R and Type R Models, DNA MOTORING CBE-AI942RS Stainless Steel Cat Back Exhaust System Compatible with 94-01 Acura Integra
#adMuffler & diameter2. 5" od inlet / 2. 5" od main piping ; Dual 3. 5" od muffler Tips. Quality constructionmade of high quality t-304 stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
More information #ad
Fitmentcompatible with 94-01 acura integra, Do Not Fit GS-R and Type R Models. Tig welded cnc machine flange for resistance against pressure and corrosion. Designthe larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound.| Brand | DNA MOTORING #ad |
| Manufacturer | DNA Motoring #ad |
| Weight | 26.5 Pounds |
| Part Number | CBE-AI942RS |
| Model | CBE-AI942RS |
| Warranty | Please contact the seller directly for warranty information for this product. |
More information #ad
2. Auto Dynasty
#ad4 Inches Burnt Muffler Tip Catback Exhaust System Compatible with Acura Integra RS GS LS 94-01, Stainless Steel
#adAuto Dynasty #ad - Made of high quality t-304 stainless steel with computerized mandrel-bends for strength and durability; TIG welded CNC machine flange for resistance against pressure and corrosion.Muffler tip type: burnt tip | muffler Exhaust Tip Diameter: 4" | Inlet Size: 2. 25". No drilling or modifications needed for installation. Gaskets and hardware are Included.
More information #ad
Aggressive deep and smooth tone sound while ensures smooth exhaust gas flow; Dyno proven to instantly increases 15-25 horsepower or low end torque; It also can increase engine output and efficiency. This catback is compatible with 94-01 Acura Integra, does NOT fit GS-R / Type R models. Easy to intall, direct bolt-on.| Brand | Auto Dynasty #ad |
| Manufacturer | Auto Dynasty #ad |
| Part Number | AD-CBE-AI942RS-BT |
More information #ad
3. SPEC-D TUNING
#adSpec-D Tuning N1 Catback Exhaust Muffler Compatible with Acura Integra Gs Ls 1994-2001
#adMore information #ad
| Brand | SPEC-D TUNING #ad |
| Manufacturer | Spec-D Tuning #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 25.39 Pounds |
| Width | 0 Inches |
| Part Number | MFCAT2-INT94 |
| Model | MFCAT2-INT94 |
More information #ad
4. Yonaka Motorsports
#adYonaka Acura Integra 94-01 DC2 Full Performance Exhaust 2DR Coupe Only
#adYonaka Motorsports #ad - 4. 25" stainless steel exhaust tip. Direct bolt on fit to OEM, all installation hardware included, sound clip video available upon request. Fully polished stainless steel. 2. 5" mandrel bent piping. Quiet, clean, and deep hum, without the irritating mid range raspy sound.More information #ad
| Brand | Yonaka Motorsports #ad |
| Manufacturer | Yonaka Motorsports #ad |
| Height | 15 Inches |
| Length | 44 Inches |
| Weight | 29 Pounds |
| Width | 11 Inches |
| Part Number | YMCB002 |
More information #ad
5. DNA MOTORING
#adDNA MOTORING CBE-AI942RS-NRT Stainless Steel Cat Back Exhaust System Compatible with 94-01 Acura Integra，Do Not Fit GS-R and Type R Models
#adDesignthe larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound.
More information #ad
Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency. Muffler & diameterdual 4" od mm muffler tip/ inlet: 2. Fitmentcompatible with 94-01 acura integra, Do Not Fit GS-R and Type R Models. 25" id/ diagonally cutlery double walled Muffler tip. Enhance performencedyno proven to instantly increases 15 - 25 horsepower / low end torque.| Brand | DNA MOTORING #ad |
| Manufacturer | DNA Motoring #ad |
| Weight | 23 Pounds |
| Part Number | CBE-AI942RS-NRT |
| Model | CBE-AI942RS-NRT |
| Warranty | Please contact the seller directly for warranty information for this product |
More information #ad
6. Morakot Racing
#adCompatible/Replacement For 1994-2001 Acura Integra RS/LS/GS Hatchback Models Only 2.5 Inch Stainless Steel Catback Exhaust System 4.5 Inch Muffler Burned Tip
#adMorakot Racing #ad - Compatible/replacement for 1994-2001 Acura Integra RS/LS/GS Hatchback Models Only. High quality suS-304 Stainless Steel. Tip diameter: 4. 5 inch, piping Diameter: 2. 5 inch. No installation Guides Included. Color: burn tip exhaust Tip, N1 Design, come with removable silencer.More information #ad
| Brand | Morakot Racing #ad |
| Manufacturer | Morakot Racing #ad |
| Height | 15 Inches |
| Length | 48 Inches |
| Weight | 28 Pounds |
| Width | 10 Inches |
| Part Number | MK88-CB-MK-AC1194025BT |
More information #ad
7. Yonaka Motorsports
#adYonaka Performance Exhaust Compatible with Acura Integra 94-01 4DR Sedan 3 INCH
#adMore information #ad
| Brand | Yonaka Motorsports #ad |
| Manufacturer | Yonaka Motorsports #ad |
| Height | 12 Inches |
| Length | 50 Inches |
| Weight | 29 Pounds |
| Width | 16 Inches |
| Part Number | YMCB002-4DR-3 |
More information #ad
8. Auto Dynasty
#ad4.5 inches Muffler Burnt Tip Stainless Steel Catback Exhaust System Compatible with Acura Integra GSR 1994-2001
#adAuto Dynasty #ad - Made of high quality T-304 stainless steel. Silencer Included. Tig welded cnc machine flange for resistance against pressure and corrosion.More information #ad
Aggressive deep and smooth tone sound while ensures smooth exhaust gas flow. Increase engine output and efficiency. Inlet / outlet Size IN: 2. 25". Muffler tip type: rounded tip. Tip diameter in: 4. 5".| Brand | Auto Dynasty #ad |
| Manufacturer | Auto Dynasty #ad |
| Part Number | CBE-AI942GSR-BT |
More information #ad
9. SR*S Tuning
#adSRS catback exhaust Compatible/Replacement for 94-01 Acura Integra LS 2D
#adSR*S Tuning #ad - Direct bolt on design. Guaranteed smooth and deep tone sound. Mandrel bent tubing. Compatible/replacement for Integra LS 94-01 2D. Japan design.More information #ad
| Brand | SR*S Tuning #ad |
| Manufacturer | SR*S Tuning #ad |
| Part Number | SRS-CBEX-AILS9401 |
More information #ad
10. Walker's
#adWalker Exhaust 31357 Exhaust Pipe Flange Gasket
#adInside diameter - 2 inches, outside diameter -2. 5 inches. Heat resistant -- designed to resist heat for long-lasting performance. Engineering expertise -- parts are reviewed and validated and approved by Walker engineers through rigorous research and development.
More information #ad
Better together -- use premium walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade. Real-world tested -- parts are tested on-vehicle and validated to ensure optimal performance on the road. Premium materials -- made from high-quality materials for durability and long life.| Brand | Walker's #ad |
| Manufacturer | Walker Exhaust #ad |
| Height | 1.04 Inches |
| Length | 6.25 Inches |
| Weight | 0.05 Pounds |
| Width | 1.13 Inches |
| Part Number | 31357 |
| Model | 31357 |
| Warranty | No Warranty |
More information #ad
