As an Amazon Associate I earn from qualifying purchases.
1. iJDMTOY #ad
IJDMTOY AA3117 Universal Fit Bull Bar Style Black Painted Stainless Steel Front Bumper License Plate Mount Bracket Holder Compatible with Off-Road Lights, LED Work Lamps, LED Lighting Bar #adiJDMTOY #ad
- Four different locations/methods to mount any off-road pod lights, LED work lamps or LED light bar, etc. Universal mounting bracket using front license plate mount location no drill, no modification required for most cases.
Unlike many other ones on the market that are made with very flimsy aluminum, which cannot withstand the impact or actually mount the LED lightbar on it. Fit type: pod cube lightbar iron Worklight Relocation Relocator Pilot Bullbar Guard Driving Car Rear Drl.
Made with 1. In this case, we recommend drilling holes to mount the bracket onto the vehicle. 5mm thick heavy-duty stainless steel with semi-gloss black paint, once you hold it, you can feel the weight. If the existing holes are only on the plastic bumper, you may use the additional holes on the side of the bracket plane to secure the bull bar.
2. Nilight #ad
90021B Led Light Bar Mounting Bracket Front License Plate Frame Bracket License Plate Mounting Bracket Holder for Off-Road Lights LED Work Lamps Lighting Bars, 2 Years Warranty, Nilight #adNilight #ad
- In some cases, you may be able to drill additional holes on the bracket to securely mount the bracket. Package include: 1Pc front license plate mounting bracket. Easy installation: no drill, just like replace a license plate using its mount location, no modification required, usually can be installed in 20 minutes.
Heavy-duty bracket: high-quality aluminum alloy material and Advanced production process, the mounting bracket is impact resistant and anti-corrosion.
Mounting position: 4 different locations/methods to install the off-road lights.
Work with most off road auxiliary lights, fog lights, SUV, 4x4, driving lights, LED work Lamp and LED light bars. Universal fitment: fits for almost all car, Jeep, pickup, truck, etc. On the bull bar, 2 sets of mounting holes on top and 1 set in front. Note: there is a possibility that the bracket holder may block some vehicles' parking sensor.
|Warranty||2 Years Warranty|
3. iJDMTOY #ad
IJDMTOY Sports Red Appearance Racing Style Nylon Tow Strap Universal Fit Compatible with Front or Rear Bumper #adiJDMTOY #ad
- Minutes to install to add a track racing inspired stylish appearance. Tow strap can be set 90° down so it won't catch onto people walking/working around your car.
Universal fit on any car; strap size: 9. 25" x 2. 00", bolt size: 1. 50" length x 050". Made of double stitched polyester nylon w/ triangular bracket.
4. Tyger Auto #ad
Tyger Auto TG-GD6T60448 Front Bumper Guard Compatible with Compatible with 2001-2007 Toyota Sequoia / 1999-2006 Toyota Tundra | Textured Black | Light Mount | Bull Bar #adTyger Auto #ad
- Will not work with adaptive cruse control. Tyger no-hassle 5 year warranty for US customers against manufacturing defects! If equipped, tow hooks need to be removed.
Fitment - compatible with 1999-2006 toyota Tundra; Compatible with 2001-2007 Toyota Sequoia. Pre-welded light mount channel for optional LED lightsLights excluded in the kit. Made of heavy-duty 2. 5inch tubing frame with durable E-coating textured black finish for rust resistance and customized look! Seamless welding for a strudy structure.
Easy bolt-on installation. May interfere front sensors if equipped. Us design patented tyger guard ! the kit includes one bumper guard and all mounting hardware and DIY installation manual. Two pre-drilled mounting holes for license plate relocation if needed.
|Brand||Tyger Auto #ad|
|Manufacturer||Tyger Auto #ad|
5. DNA MOTORING #ad
DNA Motoring BURB-028-BK Black 3" Stainless Steel Front Bumper Push Bull Bar Replacement For 00-07 Tundra Sequoia #adDNA MOTORING #ad
- 3" enlarged diameter Tubing with Seamless Welding Construction for Extra Reinforcement. Made of lightweight polished SUS-304 Stainless Steel for Strength and Durability.
Bolt-on design with Complete Mounting Kits for Ease of Installation. Pre-drilled for auxiliary Light Mounting / Removable Skid Plate. Protects vehicle Front End from Minor Impacts.
|Brand||DNA MOTORING #ad|
|Manufacturer||DNA Motoring #ad|
6. AUTOWIKI #ad
Fog Lights For 2000-2006 Toyota Tundra Not fit steel front bumper models/ 2001-2007 Toyota Sequoia 2PCS OEM Replacement Fog Lamps AUTOWIKI #adAUTOWIKI #ad
- The fog lights are designed for quick and easy installation Switch and wiring kit are included in the package. Excellent quality: fully sealed, waterproof, dust and corrosion resistant made the fog lights perform well and prevent moisture and dust from getting inside the fog light housing.
Dot/sae compliance: the fog lights own sae compliance and DOT approval. Bright illumination: the fog lights come with one pair of 9006 12V 51W light bulbs the bulbs are already pre-installed in the fog lights, which allow you to see and be seen by oncoming drivers even through a thick fog.
The fog lights are compatible for toyota tundra 2000-2006 NOT fit steel front bumper models/ Toyota Sequoia 2001-2007.
Thoroughly tested to meet federal and international standards, the fog lamps are fully street legal. Needn't for any modifications. Exact oem fit: direct fitment for oem lenses with no complex modifications. The fog lamps were sold in a pair: include left side driver side and right side passenger side. Easy installation: easy to install.
7. X AUTOHAUX #ad
X AUTOHAUX 5 Sets Front Fender Bumper Cover Clip 53879-58010 47749-58010 for Toyota for Lexus #adX AUTOHAUX #ad
- What you get - 5 sets front Fender & Bumper Cover Clip. Number - manufacturer part number: 53879-58010 47749-58010 Interchange part number: 53879-58010, 5387958010 Size - head diametermax.
34. 5mm / 026 inch, stem length: 25mm / 1. 36 inch, 6. 5mm / 028 inch, total Length: 27. 5mm / 098 inch, fit hole Size: 7mm / 1. 08 inch. Fit for lexus gx460 - 2010-2014, for toyota matrix 2009-2014, for toyota 4runner 2003-2014, for toyota prius 2010-2014, for toyota corolla 2009-2014, for toyota fj cruiser 2007-2014, for lexus is250 2006-2007, for lexus gx470 2003-2007, for toyota prius v 2012-2014, for toyota land cruiser 2008-2014, for lexus lx570 2008-2014, for Lexus IS350 2006-2007 .
Good quality - made of plastic material, anti-wear and anti-corrosion, would not break or crack easily during use.
8. XtremeAmazing #ad
XtremeAmazing Car Front Fender Bumper Cover Clip Pin Kit 53879-58010 47749-58010 Set of 5 #adXtremeAmazing #ad
- Fits toyota camry Corolla Lexus Highlander Prius. Replaces part number: 53879-58010 47749-58010 . Package contents: 5 set Front Fender & Bumper Cover Clip Kit.
9. TN TrunkNets Inc #ad
Trunknets Inc Universal Front Bumper License Plate Bracket + 6 Unique Screws and Wrench Kit #adTN TrunkNets Inc #ad
- The size 6" x 12" fits us & canada license plates & will not cover the license plate or registration sticker. Kit includes- our license plate bracket kit consists 6 screw bolts. Fits all vehicles - our standard license plate bracket is suitable for all vehicles with a flat bumper.
The metal license plate doesn't directly contact the car paint surface, anti-wear, which is totally rust-proof, so it won't lead to scratches!.100% street legal. May require drilling holes in bumper if existing holes far apart from each other.
This is why we always use non-toxic materials of the highest quality & produce all goods according to GMP standards. Highest quality - the license tag holder is made of heavy-duty polypropeline, & corrosion-resistant.
Attach your license plate to a mounting bracket using 4 flat head Screws Wrench is Included for Your Convenience & Easy Installation! Best experience - we are committed to providing customers with premium-quality automotive accessories to suit all their needs. Easy to install- align license plate bracket to existing holes on car bumper and attach bracket with 2 Sharp Screws. Bracket has four mounting holes, one in each corner to hold Your License Plate Secured.
10. GOOACC #ad
GOOACC 100PCS Nylon Push-Type Automotive Clips Rivet Retainer Fender Bumper Fasteners Clips for Toyota #52161-02020 9mm,1PC Bonus Fastener Remover #adGOOACC #ad
- Package include: 100pcs nylon Fastener Rivet Clips+1PC Bonus Fastener Remover. Higher quality replacement: -replaces oem #'s 94858560 gm 52161-02020; 5216102020 Toyota 52161-16010; 5216116010 Toyota. 1 inches & fits: 9mm/ 0 The same size & shape as original : 18mm/035inches hole.
Widely use- used in numerous Toyota models and is used to attach the bumper, or bumper cover. Sturdy and durable: made of high-quality black nylon material, anti-wear and anti-corrosion, would not break or crack easily during use. 7 inches; stem length: 28mm/ 1.
|Warranty||2 Years Warranty|