As an Amazon Associate I earn from qualifying purchases.
1. Qizpcer #ad
10 Gauge Fuse Holder, 10 AWG Inline Fuse Holder with 40 AMP ATC Blade Fuses 4pack #adQizpcer #ad
- Fuse holder dimension 42x35x13mm, Support up to 40A Standard fuses for 12V. Inline fuse holder for ATC/ATO blade fuse. Water resistant, This fuse holder comes with cap to seal out moisture.
Heavy duty 10 awg gauge red color wire Allow you to splice it into any project. Package included 4 x fuse holder and 4 x 40Amp fuse.
2. SIM&NAT #ad
1A 2A 3A 4A 5A 7.5A 10A 15A 20A 25A 30A 35A 40A Automotive Replacement Fuses, 10 Gauge Fuse Holder ATC/ATO, SIM&NAT 5 Packs In-Line Automotive Blade Fuse Holder with 65PCS Standard Car Fuses #adSIM&NAT #ad
- Suitable fuses: fits for 1a - 40a atc/ato blade fuse of 19. 1 × 18. 5 × 5. 1 mm. Easy to add additional circuits for cars, CD players, fax machines and etc.
Waterproof cap of fuse holder: Unique design of dual slot tight-fitting waterproof lid to enhance moisture-proof, waterproof performance and dust proof. Heavy duty 10 awg fuse holders, protecting circuits and electrical equipment.
Package included: 5 pack inline fuse holder + 65pcs car fuses sets 1a / 2a / 30a /35a / 10a / 4A / 7.5a / 25a / 5a / 3a / 20a / 15a / 40a 5pcs each. Premium quality: fuse holders wiring harness select Tin plated copper as conductor to ensure its good bending performance, melting resistance and excellent electrical conductivity.
3. iGreely #ad
10 Gauge Fuse Holder, 10 AWG Inline Heavy Duty Wire Fuse Holder with 30 AMP ATC/ATO Blade Fuses for Automotive Car Motorcycle Marine RV 2Ft/60CM #adiGreely #ad
- The heavy duty 10 gauge awg tin-plated copper wire is made of high quality material with good electrical conductivity and melting resistance, also can protect the circuit better.
Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. Package including: 10 gauge inline fuse holder with 30a 20a 15a Fuses, 2 years long time warranty, just contact us if you have any issues about the quliaty or other questions, we will take the issue for you via replacement or refund.
Inline fuse holder for standard blade fuses, 15a, 20A, 10a, 30a, 5a, 40a, 2A, Suitable for 1A, 7.5a, 3a, ideal for car truck trailer atv boat marine. Not easy to fall off or let water in. 10 gauge awg thick pigtail wire allow you to splice it into any project.
4. MULWARK #ad
MulWark 2 Pack 10 Gauge Tinned Copper Marine Wire Waterproof IP67 Inline Fuse Holder Pigtail Blade Fuse Block Relay with 40AMP Automotive Fuses Set for Car Truck ATV Boat Motorbikes #adMULWARK #ad
- Wide application: support atc/ato standard blade fuse of 5a, jeeps, 25a, 7.5a, boats, easy to use and ideal for car truck, 10a, 40a, ATVs, Motorcycles, 20A, 30A, RVs, 15A, and much more. Waterproof design: the gauge fuse holder is equipped with a tight-fitting, waterproof rubber cap with IP67 waterproof rating for maximum prevention of water, dust, and dirt from getting in.
What’s more, the 30cm wire length ensures convenient installation on almost all kinds of automotive devices.
Premium quality wire: high-quality soft red pigtail silica gel wire makes it easier to strip than other materials. Package included: 2 x standard inline fuse holders and 2 x 40Amp standard blade fuse.
Our car fuse can be easily identified by the white mark amp rating figures on the top and allows checking top pins for continuity. Safety protection: the heavy-duty 10 gauge awg tin-plated copper wire features an excellent oxidation resistance that adds protection to the circuit of your car alarms, car recorder, VCD player, dashboard camera, GPS, etc.
5. Qizpcer #ad
12 Volts Fuse Holder for 40A Blade Fuse 6 Pack, 10 AWG Inline Fuse Holder #adQizpcer #ad
- Waterproof lid for a Rainy Day, This item is Safe and Reliable. High quality, supports 12V Fuse up to 40A. Heavy duty 10 gauge Red Color Wire Fuse Holder. Inline fuse holder for ATC/ATO Blade Fuse. Package included 6 x Fuse Holder and 6 x 40Amp Fuse.
6. Standard Motor Products #ad
Standard Motor Products CW12F Fusible Link Wire #adStandard Motor Products #ad
- Made from high-quality materials for ultimate durability. Right for your vehicle and lifestyle. Manufactured to meet or exceed strict quality requirements. Designed to deliver trouble-free, consistent performance.
7. vrupin #ad
15A 20A 25A 30A 35A 40A Automotive Replacement Fuses, 4 Packs in-Line Automotive Blade Fuse Holder with 24PCS Standard Car Fuses, 10 Gauge Fuse Holder ATC/ATO #advrupin #ad
- Fuse holders wiring harness select Tin plated copper as conductor to ensure its good bending performance, melting resistance and excellent electrical conductivity.
Pretty waterproof for all-weather applications. Widely used in solar cell circuit, motorcycles, RVs, etc. Package included: 4 pack inline fuse holder + 24pcs car fuses sets 15A / 30A /35A / 25A / 20A / 40A 4pcs each.
Easy to add additional circuits for cars, fax machines and etc. Heavy duty 10 awg fuse holders, cd players, Protecting circuits and electrical equipment. Waterproof cap of fuse holder: Unique design of dual slot tight-fitting waterproof lid to enhance moisture-proof, waterproof performance and dust proof.
8. Standard Motor Products #ad
Standard Motor Products CW10F Fusible Link Wire #adStandard Motor Products #ad
- Manufactured to meet or exceed strict quality requirements. Designed to deliver trouble-free, consistent performance. Right for your vehicle and lifestyle. Made from high-quality materials for ultimate durability.
9. Sherco-Auto #ad
Fusible Link Wire 10 AWG Gauge Universal Black 10 FT Spool Coil, USA Made #adSherco-Auto #ad
- This low-voltage, insulated automotive cable is designed for use in demanding automotive wire harness applications where standard fuses are unsuitable. Made in USA. Brand new fusible link wire.
Fusible link protects the automotive cable harness in case of extreme current overload. Choose between 10 to 20 awg gauge and 10, 25 & 100 FT Length. Gauge: 10 awg - length: 10 ft - color: Black - Fit type : Universal Fit.
10. MCIGICM #ad
MCIGICM 12 AWG Inline Fuse Holder with 30A ATC/ATO Blade Fuse, 5 Pack #adMCIGICM #ad
- Heavy duty 12awg wire, better protection to the circuit. Package included 5 x fuse holder & 5 x 30A blade fuse. The rubber cap fits on tightly to protect any standard blade fuse inside.
Wire length: 8. 7 inches 12 gauge wire each side, Fuse holder dimension: 41x35x15mm. Fits for 1a, 2a, 20a, 15a, 5a, 4a, 7.5a, 25a, 3a, 10a, 30a atc/ATO blade fuse.